Power Supply with Battery Backup, 12 or 24 VDC, 4 A, 48 W, 8 Outputs, For Access Control, 115 VAC Input
- $ 10,499.00
- Brand: ALTRONIX
- Availability: In stock
- SKU: AL400ULACM
Input 115VAC 60Hz input rated @ 3.5A. Power supply input options: a) One (1) common power input for ACM8 / ACM8CB and lock power (factory installed). b) Two (2) isolated...
Input
- 115VAC 60Hz input rated @ 3.5A.
- Power supply input options:
- a) One (1) common power input for ACM8 / ACM8CB and lock power (factory installed).
- b) Two (2) isolated power inputs: one (1) to power the ACM8 / ACM8CB and one (1) for lock accessory power (external power supply is required). (Current is determined by the connected power supply, which must not exceed 10A total).
- Eight (8) access control system trigger inputs.
Input Options
- a) Eight (8) normally open (NO) inputs.
- b) Eight (8) open collector inputs.
- c) Any combination of the above.
Output
- 12VDC or 24VDC outputs.
- 12VDC @ 4A supply current or 24VDC @ 3A supply current.
- Class 2 power-limited outputs.
- Eight (8) independently controlled outputs.
Output Options
- a) Eight (8) fail-safe and/or fail-secure power outputs.
- b) Eight (8) form 'C' 5A rated relay outputs.
- c) Any combination of the above.
- Eight (8) auxiliary power outputs (unswitched).
Output Control
- Eight (8) independently controlled outputs.
- Fuses are rated @ 3.5A.
- Filtered and electronically regulated outputs (built-in power supply).
- The ACM8 board main fuse is rated at 10A.
Supervision
- AC fail supervision (form 'C' contacts). Notification trigger can be selected for 30 seconds (factory set) or 6 hours.
- Low battery and battery presence supervision (form 'C' contact).
Features
- Fire alarm disconnect (latching or non-latching) can be individually selectable for any or all of the eight (8) outputs.
- With battery backup capability.
- Battery not included.
- Suggested batteries: PL4.512 / PL712 / PL912.
- Fire alarm disconnect input options:
- a) Normally open (NO) or normally closed (NC) dry contact input.
- b) FACP signaling circuit polarity reversal input.
- Alarm output relay indicates that FACP input is triggered (form 'C' contact rated 1A @ 28VDC, not evaluated by UL).
- Short circuit and thermal overload protection.
Visual Indicators
- Short circuit and thermal overload protection.
- Red LEDs indicate outputs are triggered (relays are energized).
- Green LED indicates FACP disconnect is triggered.
- AC input and DC output LED indicators.
- Battery backup.
- AC input and DC output LED indicators.
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch-over to standby battery when AC fails.
- Zero voltage drop when unit switches over to battery backup (AC fail condition).
- Battery fail and battery presence supervision (form 'C' contact).
Temperature
- Operating: 0ºC to 49ºC (32ºF to 120ºF).
- Storage: -20ºC to 70ºC (-4ºF to 158ºF).
- Relative humidity 85% +/- 5%.
BTU/Hr. (approx.)
- 12VDC: 25 BTU/Hr.
- 24VDC: 37 BTU/Hr.
Enclosure
- Wall mount enclosure for indoor use.
- Accommodates up to two (2) 12VDC/12AH batteries.
- Dimensions 12.25"W x 15.5"H x 4.5"D (311mm W x 394mm H x 114mm D).
Weight
- Product weight: 10.7 lbs. (4.85 kg).
- Shipping weight: 12 lbs. (5.44 kg).