8-button Control Pad
Customizable 8-button control pad designed for meeting rooms or small to medium-sized classrooms. It allows for connecting and centrally controlling various hardware devices through its Ethernet-based platform. With its configurator software, the VK6000, users can customize the functions and layout of the keypad buttons according to their needs. This control pad offers a list of ready-to-use solutions, simplifying the management and control of room facilities from a single panel.
General Features
Keypad Design
- 4-8 customizable buttons in 14 keypad layouts
Ethernet
- 1x RJ-45 female, 10/100Base-T
- Supported protocols: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
- DHCP enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
- IP address: 192.168.0.60
- Subnet mask: 255.255.255.0
Serial
- 2x bidirectional RS-232 ports (2 x 3-pole terminal block connectors)
- Baud rate: 300 to 115200 (default: 9600)
- Data bits: 8 (default) or 7
- Stop bit: 1 (default) or 2
- Parity: None (default), even, or odd
Relay
- 2 x Relay channel (2 x 2-pole terminal block connectors)
- Normally open and isolated relays
- Contact rating: max. 24 VDC, 1 A
I/O
- 1x digital input channel (1x 2-pole terminal block connector)
- Input voltage range in VDC mode: 0 to 5 VDC; Programmable range: 1 to 5 VDC
- Dry contact mode: Pull-up 2k ohms at + 5 VDC
Switches
- Controller ID: 1x 16-segment switch
Reset Button
- 1 semi-recessed push-button
Power Consumption
- DC 5 V: 1.1 W: 5 BTU
- POE: 1.375W: 6 BTU
Environmental Conditions
- Operating temperature: 0-50 °C
- Storage temperature: -20 - 60 °C
- Humidity: 0-80% RH, non-condensing
Physical Properties
- Housing: Plastic
- Weight: 0.17 kg (0.37 lbs)
- Dimensions (L x W x H): 11.53 x 7.30 x 3.26 cm (4.54 x 2.87 x 1.28 inches)
License
- Max. Allowed: 10 Licenses
- Each time a mobile device connects to an ATEN Control Pad for remote control, one license on the Control Pad will be occupied. To purchase and add additional licenses to your ATEN control pad, contact the Engineering department for more information.
Package Contents
- 1x VK0100 8-button control pad
- 1x button pack
- 6x terminal blocks
- 1x faceplate
- 1x user instructions
