Carbon Monoxide Detector, Controller, and Transducer

Carbon Monoxide Detection and Control

The MACURCO CM6 is a low-voltage detector, controller, and transducer that integrates a dual relay, selectable 4-20 mA output, buzzer, and digital display. It is an electronic detection system used to measure CO concentration and provide feedback and automatic fan/exhaust control to help reduce CO concentrations in parking garages, maintenance areas, and other commercial applications.

Features

• UL Listed
• Mounts to a standard 4" x 4" electrical box
• Factory calibrated
• Selectable fan relay activation at: 15, 25, 35 (default), 50, or 100 ppm of CO
• Capable of displaying CO concentrations in the 0 to 200 ppm range
• Alarm relay: NO or NC @ 0.5 A
• Fan relay: SPDT @ 5 A
• Supervised system design: a detector trouble will activate the fan and alarm
• Dimensions: 114 X 102 X 54 mm

For use in enclosed parking garages

These units typically cover approximately 5,000 square feet (465 square meters) in a parking garage or similar application. The coverage radius is 40 feet (12.2 m) per detector. - Mounted on a column, the detector covers 5,000 square feet. - Mounted on a wall, the detector covers 2,500 square feet. - Do not mount in a corner. - Do not mount where the normal ambient temperature is below 0 ºF or exceeds 125 ºF (-18 ºC to 52 ºC). - Additional detectors may be required near any area where people are working or where the air is stagnant. The unit is mounted about 5 feet (1.5 m) above the floor (in the normal breathing zone), in a central area where air movement is generally good.