Wishlist

Solar Inverter - Variable Frequency Drive for 4KW (5HP) 220V AC Water Pumps: Sustainable Solution for Low-Voltage Networks

  • $ 9,699.00
  • Brand: USFULL
  • Availability: Out of stock
  • SKU: FU9000SI004GSS2

USFULL FU9000SI-2R2G-SS2 Auto Solar Pump Drive • FU9000SI Series • High Solar Efficiency • Intelligent Pumping Control System Description The FU9000SI series inverter is an advanced variable frequency drive designed...

Tags: categoria:Energía / Herramientas , marca:USFULL , proveedor:Syscom , Redes Y Conectividad , sku:FU9000SI004GSS2 , supplier:Syscom , syscom

USFULL FU9000SI-2R2G-SS2

Auto Solar Pump Drive • FU9000SI Series

• High Solar Efficiency • Intelligent Pumping Control

System Description

The FU9000SI series inverter is an advanced variable frequency drive designed specifically for solar pumping systems. It enables efficient operation of asynchronous motors using photovoltaic energy, with the ability to perform intelligent switching between AC grid and solar DC input to ensure a constant water supply.

Model Nominal Specifications

Parameter Value
Rated Power 2.2 kW
Rated Input Current 24 A
Rated Output Current 14 A
AC Input Voltage (1PH) 220V (-15%) ∼ 240V (+10%)
AC Output Voltage (1PH/3PH) 220V (-15%) ∼ 240V (+10%)

Photovoltaic (PV) Input Parameters

400 V Max. DC Voltage
200 V Starting Voltage
200 ∼ 400 V Recommended DC Range
330 V Recommended Vmp

Operating Conditions

  • Ambient Temperature: -10°C ∼ +50°C
  • Humidity: RH ≤ 90% (Non-condensing)
  • Altitude: Below 1000m (1% derating for every 100m additional)
  • Vibration: ≤ 5.8 m/s² (0.6g)

Digital Control Functions

  • S1: Forced switch to power grid
  • S2: Full water alarm (NO contact)
  • S3: Low water alarm (NC contact)
  • S4: Single-phase/three-phase algorithmic switching

Connection and Wiring Guide

To ensure the integrity of the equipment, use the following recommended gauges:

Power Cable: 2.5 mm²
Terminal Screw: M4
Tightening Torque: 0.8 Nm

Safety Notice: Installation must be performed by qualified personnel. It is mandatory to connect the ground terminal (PE) for protection. Do not open the inverter cover until 10 minutes after disconnecting power to allow capacitors to discharge. Not compatible with 2-capacitor pumps. Not compatible with single-phase pumps. The distance between the inverter and the water pump must not exceed 50m.

⚠ Important Notes

  • Solar Sizing: Consult the Engineering department to determine the correct number of solar panels required to power the drive.
  • Technical Support: In case of equipment failure, call the Engineering department. DO NOT send for inspection without contacting us first — equipment can only be serviced on-site.

Recently viewed