High-Efficiency 110 VAC / –48 VDC Power Rectifier, 90 A and 5400 W, 3 RU for Telecommunications such as Modular OLT equipment / Lithium Battery Charger
- $ 24,499.00
- Brand: LinkedPro
- Availability: Out of stock
- SKU: LP-PSOLT-90A
Syscom model: LP-PSOLT-90A The LP-PSOLT-90A rectifier is a high-reliability DC power system, designed for critical telecommunications and power applications that require a stable -48 VDC output. The system stands out...
Tags: categoria:Energía y Climatización , marca:LINKEDPRO BY EPCOM , proveedor:Syscom , sku:LP-PSOLT-90A , supplier:Syscom , syscom
Syscom model: LP-PSOLT-90A
The LP-PSOLT-90A rectifier is a high-reliability DC power system, designed for critical telecommunications and power applications that require a stable -48 VDC output. The system stands out for its high power density, efficiency greater than 92%, and power factor >= 0.99, which ensures efficient energy use and a low level of harmonic distortion. It operates with a wide AC input voltage range (90-150 Vac) and is designed for demanding environments, with an operating temperature range of -40 degrees C to +75 degrees C. Its 3U chassis design, along with hot-plug capability, facilitates installation, maintenance, and operational continuity. The system offers a nominal output of 53.5 VDC at 90 A, with a total power of 5400 W, low noise level, and excellent dynamic response. It incorporates multiple integrated protections, including over-temperature, input overvoltage and undervoltage, output overvoltage, and short-circuit protection, ensuring the protection of both the equipment and the connected loads; these features make it a robust, efficient, and safe solution for critical infrastructure applications.
Stable DC power output
- 53.5 VDC nominal
- Output current up to 90 A
- Total power 5400 W
Wide AC input range
- 90 - 150 Vac, 45-65 Hz
- Suitable for unstable power grids
High energy efficiency
- Efficiency >= 92%
- Power factor >= 0.99
- Total harmonic distortion (THD) < 5%
Robust and reliable design
- High power density
- High reliability architecture
- 19" rack, 3U height design
Operation in harsh environments
- Operating temperature: -40 degrees C to +75 degrees C
- Storage up to 85 degrees C
- Relative humidity: 5% to 95% (non-condensing)
Low electrical noise level
- Output noise < 200 mVpp (20 MHz)
- Psophometric noise < 2 mV
Fast dynamic response
- Maximum output variation: <= 5%
- Turn-on delay <= 8 s
Hot-plug capability
- Allows maintenance without service interruption
Integrated protections
- Over-temperature protection
- AC input overvoltage and undervoltage
- DC output overvoltage
- Short-circuit protection (without prolonged damage)
Battery Charging
- For this system, you can use gel, lead-acid, or lithium batteries; however, the charger voltage must be adjusted according to the battery type. For example, for a lead-acid battery, the charger voltage may be 54.8 V. In the case of lithium (LFP) batteries, the voltage can be configured between 52.5 V and 54 V, depending on the battery specifications. The rectifier can adjust the charging current.
Battery Management Parameters
- The rectifier can adjust the charging current according to the battery type.
