epcom Powerline EPL10K3FVR Industrial Voltage Regulator
Main Features
-
Rated Power: 10KVA / 8KW, 100% capacity with copper wiring.
-
Smart Design: CPU smart control to support all types of loads.
-
Quality Components: PCB with SMT process and electronic components from imported brands.
-
LCD Screen: Easy configuration and real-time monitoring.
-
Advanced Protection: Against overvoltage, undervoltage, overload, short circuit, and bypass.
- Optional Remote Control
Technical Specifications
-
Model: EPL10K3FVR
-
Control Methodology: Servo Motor with CPU microprocessor.
-
Stabilization: ±2% Adjustable.
-
Power Factor: PF ≥ 0.8.
-
Efficiency: ≥ 98%.
-
Response Time: ≤ 0.5S.
-
Delay Time [ON]: ≤ 5s [Optional].
-
Waveform Distortion: ≤ 1%.
Input
-
Rated Voltage: 3 x 120VAC [3Ph + N].
-
Voltage Range: 176VAC - 264VAC.
-
Frequency: 50/60 Hz.
Output
-
Rated Voltage: 3 x 120VAC [3Ph].
-
Stabilization: ±2% Adjustable.
- Does not have split-phase output.
Protection System
-
Overvoltage: Output cutoff when output voltage is higher than 10% [adjustable], in 3 - 5 s.
-
Undervoltage: Output cutoff when output voltage is lower than 10% [adjustable], in 3 - 5 s.
-
Overload: Output cutoff in case of overcurrent, in 3 - 5 s.
-
Short Circuit: Output cutoff when there is a short circuit, in 3 - 5 s.
-
Bypass: Manual transfer to bypass when the AVR fails or is undergoing repairs.
LCD Screen
-
Input Voltage: Real-time display.
-
Output Voltage: Real-time display.
-
Input Current: Real-time display.
-
Protections: Active protection indicator.
Other
-
Cooling System: Convection.
-
Insulation Resistance: ≥2MΩ.
-
Voltage Resistance: 2000VAC/min without damage.
-
Noise Level: <65dB/m
Operating Environment
-
Operating Temperature: 0°C-45°C (non-condensing).
-
Operating Humidity: 20%-90%.
Dimensions and Weight
-
Dimensions (WxHxL): 340 x 785 x 400 mm.
-
Net Weight: 59 kg.
-
Gross Weight: 74 kg.
Important Notes
NOTE 1: It is recommended to conduct a preliminary study to check the electrical installation conditions.
NOTE 2: If the regulator is fed with high voltage and the output voltage is even higher, this is a symptom of a phase angle mismatch in the phases powering the regulator. This must be corrected by powering the regulator from an isolation transformer.
NOTE 3: Does not include a power cord; it must be assembled with the appropriate gauge and plug for the voltage and capacity.