Outdoor Line Array Speaker | 200W RMS | 37 Hz - 20 kHz | 16 Tweeters + 4 Midranges + 1 Woofer | IP56 | In-Ground or Base Plate Installation | 25-30 ft (7.6-9.1 m) Coverage
- $ 43,699.00
- Brand: TRUAUDIO
- Availability: 8 In stock
- SKU: TT10
TRUAUDIO TT10 The TruAudio Tempest Tower is an outdoor line array bollard speaker designed to deliver uniform sound coverage, high output, and scalable performance in outdoor environments. This design utilizes...
Tags: Audio & Audífonos , categoria:Audio y Video Profesional , marca:TRUAUDIO , proveedor:Syscom , sku:TT10 , supplier:Syscom , syscom
TT10
The TruAudio Tempest Tower is an outdoor line array bollard speaker designed to deliver uniform sound coverage, high output, and scalable performance in outdoor environments. This design utilizes advanced driver alignment to maintain clarity and consistency over long outdoor distances. The tower incorporates sixteen 1-inch marine-grade tweeters, four 4-inch midrange drivers, and one 10-inch long-throw woofer in a weather-resistant enclosure. Ideal for permanent outdoor installations, it offers multiple installation methods, including partial burial or surface plate mounting with optional conduit stabilization.
Features
• Type: Outdoor line array bollard speaker.
• Frequency Response: 37 Hz - 20 kHz (-3 dB)
• Recommended Spacing: 25-30 ft (7.6-9.1 m)
• Configuration: 16 tweeters + 4 midranges + 1 woofer
• Impedance: 4Ω
• Recommended Amplifier: TruAudio D2 or 100W amplifier.
• Power: 200W RMS
• Sensitivity: 87 dB (2.83 V/1 m)
Specifications
• Woofer: 10" waterproof long-throw polypropylene bandpass
• Midrange: (4) 4" polypropylene mid-woofers
• Tweeters: (16) 1" marine-grade
• Maximum Power: 200W
• Frequency Range: 37 Hz - 20 kHz (-3 dB)
• Impedance: 4Ω
• Sensitivity: 87 dB (2.83 V/1 m)
• Dimensions: Height: 46" (1168.5 mm) x Width: 8" (203.2 mm) x Depth: 16.5" (419 mm)
• Weight: Not specified
• Protection: Weather-resistant (IP56 equivalent)
• Wiring: 2-conductor, direct burial speaker cable
• Cable Gauge: 16 AWG to 12 AWG
• Connection: Weatherproof terminals (red to red, black to blue)
• Recommended Amplifier: TruAudio D2 or 100W
• Mode: Mono
• Output: Bridged
• Connection: Binding posts bridged output
• Link Output: To connect another D2 amplifier
• One Tower: One D2 amplifier
• Partial Burial: Deep hole, bass port above ground level
• Surface Plate: Mounting on hard surfaces
• Stabilization: Optional 1" EMT conduit (6 holes)
• Spacing: 25-30 ft between towers
• Tools: Shovel, level, drill, mounting hardware
Included Accessories
• Tempest Tower
• Base plate with screws
• Spacers included
• Weatherproof connector
• Winter cover protector
Inspection: Wiring annually
Protection: Winter cover included
Safety: Disconnect power before connections
Avoid: Flooding, irrigation spray