240L Solar Water Heater, Low Pressure with 24 High-Resistance Vacuum Tubes and Food-Grade Stainless Steel 240L Insulated Tank, Hail Resistant up to 25 mm/l, Includes Magnesium Anode
- $ 9,599.00
- Brand: EPCOM
- Availability: Out of stock
- SKU: STELPWH240
Low-pressure solar water heaters are the best solution for saving on daily fuels such as LP gas and Natural Gas, which generate large amounts of pollutants and are very expensive....
Tags: categoria:Energía / Herramientas , marca:EPCOM , proveedor:Syscom , sku:STELPWH240 , supplier:Syscom , syscom
Low-pressure solar water heaters are the best solution for saving on daily fuels such as LP gas and Natural Gas, which generate large amounts of pollutants and are very expensive. Their scope of application ranges from residential homes, businesses, restaurants, gyms, and recreational parks to hotels, industries, and any facility that requires hot water service.
Product Contents
- Features a 240 L thermal tank
- Vacuum tubes
- Stainless steel structure
- Sufficient screws and hardware for installation
- Magnesium anode
- Gaskets
The solar water heater functions by utilizing the natural pressure generated by the height of the water storage tank (tinaco). To ensure optimal performance, it is important that the tank is installed above the solar heater, with a recommended minimum height difference of 1.2 meters.
The equipment includes the storage tank, glass tubes, and the solar heater's metal structure. Materials and accessories required for installation are not included.
Installation Diagram for a Low-Pressure System without Hot Water Backup
Installation Diagram for a Low-Pressure System with Hot Water Backup
Installation Diagram for a System with Pressurization Pump and Hot Water Backup
Tank Connections
- Cold water inlet. 3/4" Male x 35mm stainless steel (SUS304)
- Water vent. 1/2" Female x 25mm stainless steel (SUS304)
- Hot water outlet. 3/4" Male x 35mm stainless steel (SUS304)
- Maintenance outlet. 3/4" Female stainless steel (SUS304)
- Copper plug for water drainage and equipment maintenance. 3/4" Male
Considerations and Precautions
- DO NOT INSTALL WITHOUT A WATER STORAGE TANK (TINACO) AT THE LOCATION, AS THIS CAN CAUSE DAMAGE TO THE THERMAL TANK, LEADING TO WATER LEAKS.
- Images may vary slightly from the actual physical product.
- Handle with care; avoid removing any protective material during transport and handling.
- Take special care when handling the glass tubes; they are extremely delicate. Do not drop, stack, or strike them.
- Transportation or handling of boiler components should be done by two people.
- It is recommended to regularly clean the water inlets and outlets of the boiler as well as its air vent to prevent damage from corrosion. (Remove any limescale buildup at the inlets) (every 3 months).
- In areas with high water salinity, maintenance and replacement of the equipment's magnesium rod are recommended every 3 months. It is necessary to drain any residue found in the thermal tank or vacuum tubes; it is possible to use a descaling liquid or a mixture of 50% water and 50% vinegar, then rinse thoroughly with water.
- Anchor the boiler legs before filling with water.
Installation Videos
How to assemble a Solar water heater
Solar water heater unboxing
Aerial view of EPCOM solar water heater
Panoramic view of the EPCOM Solar Water Heater