90L Solar Water Heater, Low Pressure with 9 High-Resistance Vacuum Tubes and Food-Grade Stainless Steel Insulated Tank, Resistant to Hail up to 25 mm/l, Includes Magnesium Anode
- $ 4,299.00
- Brand: EPCOM
- Availability: In stock
- SKU: STE-LPWH90
Low-pressure solar water heaters are the best solution for saving on daily fuels like LP gas and Natural Gas, which generate large amounts of pollutants and are very expensive. Their...
Tags: categoria:Energía / Herramientas , marca:EPCOM , proveedor:Syscom , sku:STE-LPWH90 , supplier:Syscom , syscom
Low-pressure solar water heaters are the best solution for saving on daily fuels like LP gas and Natural Gas, which generate large amounts of pollutants and are very expensive. Their range of application includes homes, businesses, restaurants, gyms, recreational parks, hotels, industries, and any installation that requires hot water service.
Product Contents
- Includes a 90 L thermal tank
- Vacuum tubes
- Stainless steel structure
- Necessary hardware for installation
- Magnesium anode
- Gaskets
The solar water heater works by utilizing the natural pressure generated by the height of the water storage tank. To ensure optimal performance, it is important that the water tank is installed above the solar heater, with a recommended minimum height difference of 1.2 meters.
The equipment includes the storage tank, the glass tubes, and the solar heater's metal structure. Materials and accessories necessary for installation are not included.
Installation Diagram of a Low-Pressure System without Hot Water Backup
Installation Diagram of a Low-Pressure System with Hot Water Backup
Installation Diagram of a System with Pressurizing Pump and Hot Water Backup
Tank Connections
- Cold water inlet. 3/4" Male x 35 mm stainless steel (SUS304)
- Water vent. 1/2" Female x 25 mm stainless steel (SUS304)
- Hot water outlet. 3/4" male x 35 mm stainless steel (SUS304)
- Maintenance outlet. 3/4" Female stainless steel (SUS304)
- Copper plug for water drainage and equipment maintenance. 3/4" Male
Considerations and Precautions
- DO NOT INSTALL WITHOUT A WATER TANK ON THE PREMISES, AS THIS CAN CAUSE DAMAGE TO THE THERMAL TANK, LEADING TO WATER LEAKS.
- Images may vary slightly from the actual product.
- Handle with care; avoid removing any protective elements during transport and handling.
- Take special care when handling the glass tubes; they are extremely delicate. Do not throw, stack, or strike them.
- Transport or handle the boiler components with two people.
- It is recommended to regularly clean the water inlet and outlet, as well as the vent, to prevent corrosion damage. (Remove the scale that accumulates at the inlets every 3 months).
- In places where the water has high salt content, it is recommended to perform maintenance and replace the magnesium rod of the equipment every 3 months. It is necessary to drain any residue found in the thermal tank or vacuum tubes; it is possible to use a descaling liquid or a mixture of 50% water and 50% vinegar, then rinse thoroughly with plenty of water.
- Anchor the boiler legs before filling with water.
Installation Videos
How to assemble the solar boiler
Solar boiler unboxing
Aerial view of the EPCOM solar boiler
Panoramic view of the EPCOM Solar Boiler