Outdoor Connection Box with Side Connection for 6 Lines (double screw). Includes Glands.

Outdoor enclosure with parallel connection terminals for 6 lines.

Key features

• Plastic material.
• Dimensions: 125 x 55 x 40 mm
• Recommended for 12-22 AWG gauges
• Protection rating: IP66
• Operating temperature range: -40°C to +120°C
• Recommended for use with:
  • Alternating current (AC) 110V, 3 Amps maximum.
  • Direct current (DC) 12V / 24V, 10 Amps maximum.

Installation process

1. Remove the enclosure cover and loosen both compression glands.
2. Ensure that the system is not energized.
3. Insert both cables into the enclosure body, taking care not to damage the gasket.
4. Strip each cable and attach the spade terminal.
5. Loosen the terminal screws, place each corresponding terminal one by one, and tighten the screw for each terminal.
6. Before closing the enclosure, verify that there is no contact between both lines.
7. Tighten the glands and replace the enclosure cover.

Important notes

• It is recommended to use spade terminals to ensure a correct installation (do not use bare wire directly on the terminal).
• The crimping of the spade terminals should be done after inserting the cable into the enclosure.
• The use of stranded wire is recommended for this application.