MPPT Solar Controller / 20A / 12/24V / 100V Voc / RS-485 / Lithium Batteries / IP68
- $ 1,399.00
- Brand: EPEVER
- Availability: In stock
- SKU: TRACER5206BP
The Tracer-BP series adopts advanced MPPT (Maximum Power Point Tracking) charging methods, which result in an increase in charging efficiency of up to 30% compared to PWM charge controllers. The...
Tags: categoria:Energía / Herramientas , marca:EPEVER , proveedor:Syscom , sku:TRACER5206BP , supplier:Syscom , syscom
The Tracer-BP series adopts advanced MPPT (Maximum Power Point Tracking) charging methods, which result in an increase in charging efficiency of up to 30% compared to PWM charge controllers. The RS485 interface with the standard MODBUS communication protocol and 5V/150mA power supply makes it easy for the customer to expand the application. With accessories such as the MT50, WiFi module, Bluetooth adapter, and IoT module, users can perform remote monitoring and control of the solar system via an app and a cloud platform.
TRACER-BP Series Features
- Controller with advanced MPPT technology, common negative ground.
- Dustproof and waterproof design with IP68 rating.
- Wide MPP operating voltage range.
- Multiple load working modes.
- Includes RS-485 communication bus interface.
- Comprehensive electronic protection.
Configuration
To configure charging parameters, a monitor or the EPEVER communication cable is required:
- MT52 Remote monitor for EPEVER controllers.
- CCRS485150U Communication cable for EPEVER controllers.
Important!
- Charging and discharging of this Lithium battery (LiFePO4) must be done in compliance with the parameters in the product specification.
- For solar energy systems, it is recommended to use an EPEVER XTRA-XXXX-N series charge controller; parameter programming for the battery (LiFePO4) is required.
- For programming and care, the instructions in the attached documents in the download tab must be followed.
Manual-Lithium-iron-phosphate-(LiFePO4)_
Programming XTRA-XXXX-N Controller Parameters for Lithium Battery (LiFePO4)_
Note: When using a lithium battery, the system voltage cannot be identified automatically; manual programming is required.
Consult with our Engineering department for your installation
Certificates
For technical support and technical inquiries, do not hesitate to contact our Engineering department.