3/4" Smooth RD11 Fiber Optic Duct, Green Color, Pre-lubricated, 200-Meter Coil
- $ 6,799.00
- Brand: LINKEDPRO
- Availability: In stock
- SKU: LP-10-SDR11-V-P-S-1R-0200
This is a smooth-wall duct made of high-density polyethylene, designed primarily for underground installations. Its design stands out for offering long-lasting protection for cables against extreme soil conditions, providing a...
Tags: categoria:Cableado Estructurado , marca:LINKEDPRO , proveedor:Syscom , sku:LP-10-SDR11-V-P-S-1R-0200 , supplier:Syscom , syscom
This is a smooth-wall duct made of high-density polyethylene, designed primarily for underground installations. Its design stands out for offering long-lasting protection for cables against extreme soil conditions, providing a permanent path that facilitates future repairs or replacements.
Manufactured in flexible HDPE, it allows for gradual bends without requiring special equipment, has excellent low-temperature properties allowing it to be installed even in very cold climates, and provides long-term protection for cables against extreme soil conditions.
Characteristics
- Flexibility: Its manufacture in flexible HDPE allows for gradual bends without the need for special equipment.
- Thermal Resistance: It possesses excellent properties at low temperatures, which allows for its installation in very cold climates.
- Mechanical Resistance: In all its variants (SDR 11, 13.5, and 17).
Physical and Mechanical Properties
- Tensile Strength: 10 MPa minimum.
- Elongation: 400%.
- Hardness: 60 to 68.
Installation Advantages
- Cost Reduction: It is distributed in long lengths (coils), which reduces the number of connections needed and, consequently, the cost of installation.
- Versatility: A version with UV protection is available for aerial installations.
- Lubrication Options: Can be requested pre-lubricated and with a pull tape to facilitate cable routing.
Technical Specifications (SDR)
The duct is classified according to its SDR (Standard Dimension Ratio), which is the ratio between the outer diameter and the wall thickness:
- SDR 11: Greater wall thickness for higher resistance.
- SDR 13.5: Intermediate resistance level.
- SDR 17: Thinner wall for lower external pressure applications.
Tests and Standards
| TEST | STANDARD |
|---|---|
| Impact resistance | NMX-E-029 |
| Crush resistance | NMX-E-014 |
| Tensile strength of plastic materials | NMX-E-082 |
| Determination of Shore "D" hardness | NMX-E-061 |
| Eccentricity | NMX-E-021 |
| Dimensions | NMX-E-021 |
| Ovality | NMX-E-021 |
| Melt flow index | NMX-E-135 |
| Relative density | NMX-E-004 NMX-E-166 |
| Thermal reversion | NMX-E-179 |