SYSCOM TOWERS
Tower Stabilizer for STZ-35G Sections, Hot-Dip Galvanized.
Tower Stabilizer for STZ-35G Sections, Hot-Dip Galvanized.
Couldn't load pickup availability
Description
A stabilizer or anti-torsion arm, as it is also known, is an element designed to secure the tower at a specific height to prevent movement caused by strong wind currents.
Unlike a flange (which is attached at one point per face of the tower), a stabilizer is attached at two points per face; that is, there are 6 attachment points at the same height, which prevents excessive torsion in the tower and provides better rigidity to the structure.
Applications
When is a stabilizer installed?
A stabilizer is not a mandatory piece in the assembly of a typical tower. Generally, a stabilizer is installed when:
- There is an antenna with a large wind-loading surface (equal to or greater than 1m in diameter).
- When there are wind concentrations due to the terrain or conditions of the area.
- In high-precision wireless links.
Similarly, it is recommended to replace the installation of a flange when a stabilizer is added, since we must remember that the more cables we attach to the tower, the heavier it will be and the more load we will be placing on the ground.
Technical Specifications
- Material: Hot-dip galvanized steel.
- Compatible with section: STZ-35G.
- Face width: 70 cm.
- Weight: 12.80 Kg.
Package Contents
- 3 - Attachment brackets (spiders) with nuts.
- 3 - Corner pieces
- 3 - Channels
- 24 - Assembly bolts with lock nuts.
Certifications
Product Manufactured Under ISO 9000 Standards
Installation
Typical installation image.


