SYSCOM TOWERS
Tower Stabilizer for STZ-45G Sections, Hot-Dip Galvanized.
Tower Stabilizer for STZ-45G Sections, Hot-Dip Galvanized.
Couldn't load pickup availability
A stabilizer or anti-torsion arm, as it is also known, is an element designed to secure the tower at a specific height to prevent movement caused by strong wind currents.
Unlike a guy-wire bracket (which attaches at one point on each side of the tower), a stabilizer attaches at two points per side—meaning there are 6 attachment points at the same height—which prevents excessive torsion in the tower and provides better structural rigidity.
When should a stabilizer be installed?
A stabilizer is not a mandatory component in the assembly of a typical tower. Generally, a stabilizer is installed when:
- There is an antenna with a large surface area (equal to or greater than 1m in diameter).
- When wind concentrations exist due to the terrain or area conditions.
- For high-precision wireless links.
It is also recommended to replace the installation of a standard bracket when adding a stabilizer, as we must remember that the more cables we add to the tower, the heavier it will be and the more load we will be placing on the ground.
- Material: Hot-dip galvanized steel.
- Compatible with section: STZ-45G.
- Face width: 90 cm.
- Weight: 14.90 Kg.
- 3 - Mounting brackets (Spiders) with nuts.
- 3 - Corner pieces
- 3 - Channels
- 24 - Assembly bolts with lock nuts.
Typical installation image
Product manufactured under ISO 9000 standards


