(hEX PoE) Routerboard 5-port Gigabit Ethernet PoE 802.3at, 1 USB port
- $ 2,599.00
- Brand: MIKROTIK
- Availability: Out of stock
- SKU: RB960PGS
hEX PoE hEX PoE is a five-port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and an SFP port for...
Tags: access-point , categoria:Redes e IT , marca:MIKROTIK , networking , proveedor:Syscom , router , sku:RB960PGS , supplier:Syscom , switch , syscom , wifi
hEX PoE
hEX PoE is a five-port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a USB 2.0 port and an SFP port for adding fiber optic connectivity. Ports 2-5 can power other PoE-capable devices with the same voltage applied to the unit.
It is affordable, small, and easy to use, but at the same time, it comes with a very powerful 800 MHz CPU, capable of all the advanced configurations supported by RouterOS. Fewer power adapters and cables to worry about! The maximum current is 1A per port; Ethernet ports are shielded.
It also supports the 802.3at/af standard or passive PoE input/output. Ethernet ports 2-5 can power other PoE-capable devices with the same voltage applied to the unit. Fewer power adapters and cables to worry about! It can power af/at in mode B (4,5 +) (7,8 -) with compatible devices if a 48-57 input voltage is used (48V power supply sold separately).
Important Note: When using a 48 ~ 56 V power supply, it will only power 802.3af/at equipment
*.
Main RouterOS features
General Specifications
- Product Code: RB960PGS
- Architecture: MIPS-BE
- CPU: QCA9557
- CPU Core Count: 1
- CPU Frequency: 800 MHz
- License level: 4
- RAM Memory: 128 MB
- Storage: 16 MB
- Storage Type: FLASH
- Operating Temperature: -40 + 70 C
Powering
- Power consumption: 9W
- Number of DC inputs: 2 (DC jack, PoE-IN)
- PoE input: Passive PoE
- Supported input voltage: 12-57 V DC
- Supported input voltage (PoE): 12-57 V DC
- PoE output: 802.3af/at requires 48-57 V DC power supply
Connectivity
- Ethernet ports: 5 x 10/100/1000 Mbps
- SFP port: 1
- Number of USB ports: 1
- USB power reset: Yes
- USB slot type: USB type A
- PCB temperature monitor: Yes
- Voltage monitor: Yes
Ethernet test results
| RB960PGS | QCA9557 (800Mhz) 1G all port test | |||
|---|---|---|---|---|
| Mode | Configuration | 1518 byte | 512 byte | 64 byte |
| Bridging | none (fast path) | 161.9 kpps 1,966.1 Mbps | 401.5 kpps 1,644.5 Mbps | 542.3 kpps 277.7 Mbps |
| Bridging | 25 bridge filter rules | 143.2 kpps 1,739.0 Mbps | 145.5 kpps 596.0 Mbps | 146.2 kpps 74.9 Mbps |
| Routing | none (fast path) | 161.9 kpps 1,966.1 Mbps | 396.3 kpps 1,623.2 Mbps | 521.7 kpps 267.1 Mbps |
| Routing | 25 simple queues | 161.9 kpps 1,966.1 Mbps | 217.2 kpps 889.7 Mbps | 216.0 kpps 110.6 Mbps |
| Routing | 25 ip filter rules | 74.6 kpps 905.9 Mbps | 78.0 kpps 319.5 Mbps | 76.5 kpps 39.2 Mbps |
* All tests are done with Xena Networks specialized test equipment (XenaBay), and done according to RFC2544 (Xena2544)
* Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
* Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
* Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Included Parts
*Images are for illustrative purposes only.
