UniFi Access Elevator Starter Kit / PoE for Floor Selection / Up to 18 Floors / Includes Elevator Hub / G2 Reader / 2 PoE Extenders / 10 Access Cards / Indoor & Outdoor / NDAA Compliant
- $ 28,799.00
- Brand: Ubiquiti Inc
- Availability: 9 In stock
- SKU: UA-SK-ELEVATOR
Elevator Starter Kit Model: UA-SK-Elevator UniFi Access kit for elevator access control, including (1) Elevator Hub, (1) G2 Reader, (2) 2-wire PoE extenders, and (10) Access Cards. It connects to...
Tags: access-point , categoria:Control de Acceso , marca:Ubiquiti Inc , networking , proveedor:Syscom , Redes Y Conectividad , router , sku:UA-SK-ELEVATOR , supplier:Syscom , switch , syscom , wifi
Elevator Starter Kit
UniFi Access kit for elevator access control, including (1) Elevator Hub, (1) G2 Reader, (2) 2-wire PoE extenders, and (10) Access Cards. It connects to readers inside the elevator via PoE to authorize floor selection and supports up to 18 floors with digital inputs for cabin status and emergency.
- Dimensions: 129.3 × 244.7 × 33.6 mm (5.1 × 9.6 × 1.3")
- Weight: 537 g (1.2 lb)
- Enclosure / Mount Material: Polycarbonate
- Network Interface: (4) 10/100/1000 Base-T ports (readers / cameras)
- Management Interface: (1) 10/100/1000 Base-T port
- Power Method: PoE++ (UL 294, limited power source class 2, LPS/PS2 PSU UL 60950-1/62368-1)
- Max. Power Consumption: 7 W (excluding PoE output)
- PoE Input: (1) PoE++, 50 VDC, 1.2 A
- PoE Outputs: PoE pass-through; (4) PoE 50 VDC, 42 W total budget
- Digital Inputs (elevator): (5) Cabin position; (6) Cabin status (up/down/stop/full/door open/door closed); (1) Emergency
- Outputs: (18) Floor relays, 30 VDC / 2 A (max.)
- LEDs: System (white/blue/red); output relays (white)
- Buttons: (1) Factory reset button (on terminal blocks)
- ESD/EMP Protection: Air ±8 kV, contact ±4 kV
- Operating Temperature: -10 to 40 °C (14 to 104 °F)
- Operating Humidity: 5–95% non-condensing
- Certifications: CE, FCC, IC
- Dimensions: 93 × 40 × 36.5 mm (3.7 × 1.6 × 1.4")
- Weight: 82 g (2.9 oz)
- Enclosure Material: Polycarbonate and glass, flush wall/standard box mount
- Weather Protection: IP55 (suitable for indoor and outdoor use)
- Network Interface: (1) 10/100 MbE RJ45 port
- Wireless Connectivity: BLE 4.1
- Power Method: PoE (UL 294, limited power source class 2, LPS/PS2 PSU UL 60950-1/62368-1)
- Supported Voltage: 48 VDC
- Max. Power Consumption: 5 W
- Sensors: Integrated proximity sensor
- Audio: Integrated 8 Ω, 0.7 W speaker
- LEDs: Configurable R/G/B/W indicators
- Button: Factory reset
- NFC: 13.56 MHz frequency, reading range < 30 mm
- ESD/EMP Protection: Air ±15 kV, contact ±8 kV
- Operating Temperature: -10 to 40 °C (14 to 104 °F) typical for the reader; extended range down to -30 °C depending on environment and mounting
- Operating Humidity: 5–95% non-condensing
- Model: UACC-Extender-2Wire-Tx/Rx (x2 included)
- Dimensions (Tx/Rx): 40 × 105 × 25 mm (1.6 × 4.1 × 1")
- Weight: PoE In: 77 g (2.7 oz); PoE Out: 79 g (2.8 oz)
- Enclosure / Mount Material: Polycarbonate
- Network Interface: (1) 10/100 MbE; (1) Homeplug AV for 2-wire transmission
- Management Interface: (1) 10/100 MbE
- Power Method: PoE++
- Max. Power Consumption: 3 W (excluding PoE output)
- PoE Input: (1) PoE++, 50 VDC, max. 1.2 A
- PoE Output: (1) PoE+, 48 VDC, 0.72 A (for reader or remote device)
- LED: White (device/link status)
- ESD/EMP Protection: Air ±8 kV, contact ±4 kV
- Operating Temperature: -10 to 40 °C (14 to 104 °F)
- Operating Humidity: 5–95% non-condensing
- Certifications: CE, FCC, IC
- Quantity: 10 UniFi Access proximity cards
- Format: ISO 7810 ID-1 (credit card size)
- NFC - Frequency: 13.56 MHz
- NFC Technology: ISO/IEC 14443 Type A, MIFARE DESFire, proprietary UniFi Access security protocol
Package Contents
(1) Elevator Hub • (1) G2 Reader • (2) 2-wire PoE extenders • (10) UniFi Access cards
