12 m Floor-Mounted Guyed Tower Kit with Hot-Dip Galvanized STZ30G Section. (Guy wires not included).
- $ 18,699.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-30G-012
Highlighted Features Product manufactured under ISO 9001:2015 standards High elevation / Low cost 100% section-by-section assembly inspection Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008 Ideal for high-humidity coastal zones or industrial...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-30G-012 , supplier:Syscom , syscom
Highlighted Features
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost
- 100% section-by-section assembly inspection
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008
- Ideal for high-humidity coastal zones or industrial areas
Physical Characteristics
- Maximum Axial Load: 200 kg
- Height: 12 meters (4 sections)
- Wind resistance: 200 km/hr
- Anti-corrosion protection: Hot-dip galvanized (NMX-H-004-SCFI-2008)
- Application: Outdoor (Humid zones)
The following components are included
| Quantity | Model | Description |
|---|---|---|
| 4 | STZ30G | 30 cm face width tower section |
| 1 | SCZ30PG | 30 cm tower top with lightning rod clamp |
| 1 | SBA30G | Base for 30 cm tower |
| 1 | SAB30G | Tower base anchor |
| 2 | SJB30G | Guy wire bracket |
| 3 | SAP02G | Ground anchor for guy wire |
| 12 | CUELLO-14-HDG | Thimble for guy wire |
| 36 | NUDO-316-FJG | 3/16" wire rope clip |
Guy wire not included. 100 meters of 1/8" guy wire (SRET-318-CAM) or larger diameters is recommended.
Turnbuckles not included. 6 turnbuckles of 1/2' x 6' are recommended. (TEN1/2X6OGJ or TEN1/2X6OQJ).
**Failure to use installation accessories such as brackets, tower base, tower anchor, or guy wire anchors will void the equipment warranty, and any additional modifications are the sole responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Self-contained LED strobe with photocell, solar panel, and battery. Type L810 |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp |
*Signaling standards dictate that the tower must be painted in 7 alternating bands of equal size; 4 orange-red bands and 3 white bands
Lifeline system (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets |
| 1 | S-GULV | Line guide |
| 15 | SRET-338 | 3/8" cable |
| 6 | NUDO-38FJG | 3/8" forged clip |
| 2 | CUELLO-38-HDG | 3/8" thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer |
| 1 | SYS-USA7B | (Optional) Full-body harness |
*NOM-009 mandates the use of fall protection systems when working on a structure
New! Lightning rod + Grounding kit with cable. LINKEDPRO brand (Not included)
KLP-TZ12-PRO - All-inclusive! Ideal for 12m towers with crown dipole, cabling, and electrodes.
Alternatively, you may quote the following grounding or lightning rod components individually:
Physical grounding system recommended for the tower and mounted equipment (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic junction box |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | 1000A capacity grounding busbar with insulators (without enclosure) |
* It is recommended to use 4 AWG jacketed copper cable (SLY-287-GRN) for grounding from the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Basic lightning protection system recommended for the tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp electrode. Includes a bag of impedance-improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic junction box |
| 1 | ANTIOX | Aerosol for terminal protection |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 8 | TGAC | Tower insulator |
*The dipole tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence
2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering the electrode is installed at a maximum of 3 meters from the tower, approximately 8 meters are used
See the Grounding + Lightning Rod connection diagram in the following DIAGRAM
Recommendations
- Ensure the installation is performed by a trained professional
- Schedule a maintenance plan to check guy wire tension and tighten hardware
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts
- A stress analysis must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending on the tower, leading to structural failure
- The tower must be painted in orange-red and white, in 7 bands of equal height, starting and ending in orange-red (SYSCOM does not perform tower painting)
- It is recommended to illuminate the tower, at least at the top, with a red lamp
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
