12 m Floor-Mounted Guyed Tower Kit with Electro-Galvanized STZ35 Section (Guy wires not included).
- $ 22,199.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35E-012
Key Features Product manufactured under ISO 9001:2015 standards High Elevation / Low cost 100% Section-by-Section Assembly Inspection Electrolytic Galvanized in accordance with ASTM B-633 standards Ideal for dry, corrosion-free areas...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35E-012 , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards
- High Elevation / Low cost
- 100% Section-by-Section Assembly Inspection
- Electrolytic Galvanized in accordance with ASTM B-633 standards
- Ideal for dry, corrosion-free areas
Physical Characteristics
- Maximum Axial Load: 350 kg
- Height: 12 meters (4 sections)
- Wind Resistance: 200 km/h
- Anti-corrosive protection: Electrolytic Galvanizing (ASTM B-633)
- Application: Outdoors (Desert or low-humidity areas)
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 4 | STZ35 | 35 cm face-width tower section |
| 1 | SCZ35P | 35 cm tower top with set screw for lightning rod |
| 1 | SBZ35 | 35 cm tower base |
| 1 | SAB45 | Anchor for 35/45 tower base |
| 2 | SJB35 | Guy wire attachment bracket |
| 3 | SAZ45 | Floor anchor for guy wire |
| 12 | CUELLO-14-HDG | Thimble for guy wire |
| 36 | NUDO-316-FJG | 3/16' cable clamp |
Guy wire not included. 95 meters of 3/16' guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters are recommended.
Turnbuckles not included. 6 turnbuckles of 5/8' x 9' are recommended (TEN5/8X9OGJ or TEN5/8X9OQJ).
Failure to use installation accessories such as brackets, tower base, tower anchor, or guy wire anchors results in loss of product warranty, and any additional modifications remain the responsibility of the installer.
Supplementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. L810 type |
| 2 | HLU3R2 | Mounting for EIGSLSE obstruction light |
*Signaling standards dictate that the tower must be painted in 7 equally-sized bands; 4 bands in reddish-orange and 3 in white.
Lifeline system (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening hardware |
| 1 | S-GULV | Line guide |
| 15 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged cable clamp |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer |
| 1 | SYS-USA7B | (Optional) Suspension harness |
*NOM-009 mandates the use of systems that prevent accidental falls on a structure.
Grounding system recommended for the tower and mounted equipment (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic access box |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | Bonding bar with 1000A capacity insulators (No cabinet) |
* The use of 4 AWG insulated copper cable (SLY-287-GRN) is recommended for grounding from the electrode to the tower. For equipment on the tower, 6 AWG cable (SLY-291-GRN) can be used.
Basic lightning protection system recommended for the tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp. electrode. With one bag of impedance-improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic inspection box |
| 1 | ANTIOX | Terminal protection spray |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 8 | TGAC114 | Tower insulator |
*The dipole tip offers a 72° protection cone under the coil. Recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering the electrode is installed at a maximum of 3 meters from the tower, approx. 8 meters are used.
See the Physical Ground + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations
- Ensure the installation is performed by a trained professional
- Schedule a maintenance plan to check guy wire tension and tighten hardware
- Do not install solar panels at a height greater than 6 meters. Verify compatibility between solar cells and mounts
- A stress study must be performed when placing an eccentric load on the tower. This can cause excessive twisting and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white tones, in 7 strips of equal height starting and ending with orange-red (SYSCOM does not perform tower painting)
- It is recommended to illuminate the tower at least at the tip with a red lamp
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
