Skip to product information
1 of 1

SYSCOM TOWERS

15 m Guyed Tower Kit with Galvanized STZ35 Section (Guy wires not included).

15 m Guyed Tower Kit with Galvanized STZ35 Section (Guy wires not included).

Regular price $ 25,299.00
Regular price Sale price $ 25,299.00
Sale Sold out
Taxes included. Shipping calculated at checkout.
Quantity
Vendido por Glaretum, Proveedor de Servicio Autorizado Apple Paga con tarjeta, Apple Pay o PayPal ¿Dudas? Escríbenos por WhatsApp o llama al 800 461 0096

SYSCOM TOWERS

Key Features

  • Product manufactured under ISO 9001:2015 standard
  • High Elevation / Low cost
  • 100% Section-by-Section Assembly Inspection
  • Electrolytic galvanization according to ASTM B-633 standard
  • Ideal for dry, corrosion-free areas

Physical Characteristics

  • Maximum Axial Load: 350 Kg
  • Height: 15 meters (5 sections)
  • Wind resistance: 200 km/h
  • Anti-corrosive protection: Electrolytic Galvanization (ASTM B-633)
  • Application: Outdoor (Desert or low-humidity areas)

Includes the following components

Quantity Model Description
5 STZ35 35 cm face width tower section
1 SCZ35P 35 cm tower top cap with lightning rod clamp
1 SBZ35 35 cm tower base
1 SAB45 Anchor for 35/45 tower base
2 SJB35 Guy wire attachment bracket
3 SAZ45 Floor anchor for guy wire
12 CUELLO-14-HDG Thimble for guy wire
36 NUDO-316-FJG 3/16' cable clamp

Does not include guy wire. 115 meters of 3/16' guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters are recommended.

Does not include turnbuckles. 6 turnbuckles of 5/8' x 9' are recommended. (TEN5/8X9OGJ or TEN5/8X9OQJ).

Failure to use installation accessories such as Brackets, Tower Base, Tower Anchor, or Guy Anchors is considered a voidance of the equipment warranty, and any additional modifications remain the responsibility of the installer.

Complementary accessories (Not included)

Signaling/Lighting System (Not included)

Quantity Model Description
2 EIGSLSE Self-contained LED strobe with photocell, solar panel, and battery. Type L810
2 HLU3R2 Mounting for EIGSLSE obstruction light

* The signaling standard dictates that the tower must be painted in 7 strips of equal size; 4 strips in reddish-orange and 3 in white.

Lifeline system (Not included)

Quantity Model Description
1 SHE-LV Pair of attachment brackets
1 S-GULV Line guide
18 SRET-338CAM 3/8' cable
6 NUDO-38FJG 3/8' forged cable clamp
2 CUELLO-38-HDG 3/8' thimble
1 TRY-ACC-SLIDER (Optional) Safety Slider for Installer
1 SYS-USA7B (Optional) Suspension Harness

* NOM-009 makes the use of systems that arrest accidental falls on a structure mandatory.

Recommended Grounding System for Tower and Mounted Equipment (Not included)

Quantity Model Description
1 TG45AB 45 A grounding electrode with Electrode, Filter, and H2Ohm compound
1 S610 Plastic inspection well
3 TGCR11 Eye connector
2 TGAB18 Rod connector
1 TGBUSG10 Grounding bus bar with insulators, 1000A capacity (Without cabinet)

* The use of 4 AWG coated copper cable (SLY-287-GRN) is recommended for grounding from the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.

Recommended Basic Lightning Rod System for Tower (Not included)

Quantity Model Description
1 TGTDPC Lightning rod tip with aluminum mast (MASTIL1.2)
1 TG45AB 45 Amp electrode with one bag of impedance improving compound (H2OHM), compass, and level
1 S610 Small plastic inspection well
1 ANTIOX Aerosol for terminal protection
3 TGCR11 Eye connector
2 TGAB18 Rod connector
10 TGAC114 Tower insulator

*The dipole-type rod offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for the integration (SLY-346-BLK). Considering an installation of the electrode at a maximum of 3 meters from the tower, approx. 8 meters are used.

See the Grounding + Lightning Rod connection diagram in the following DIAGRAM.

Recommendations

  • Ensure the installation is performed by a trained professional
  • Schedule a maintenance plan to check guy wire tension and adjust hardware
  • Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts
  • A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive twisting and bending in the tower, leading to structural failure
  • The tower must be painted in orange-red and white, in 7 stripes of equal height starting and ending with orange-red (SYSCOM does not perform tower painting work)
  • It is recommended to illuminate the tower at least at the tip with a red light

Representative Diagram: Guy Wire Installation Version 2.0

Guy Wire Installation Diagram Version 2.0

Installation Images

Installation Images

View full details