18 m Height Guyed Floor Tower Kit with Hot-Dip Galvanized STZ30G Section. (Guy wires not included).
- $ 25,099.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-30G-018
Key Features Product manufactured under ISO 9001:2015 standards High elevation / Low cost 100% section-by-section assembly inspection Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008 Ideal for high-humidity coastal zones or industrial...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-30G-018 , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost
- 100% section-by-section assembly inspection
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008
- Ideal for high-humidity coastal zones or industrial areas
Physical Characteristics
- Maximum Axial Load: 200 kg
- Height: 18 meters (6 sections)
- Wind Resistance: 200 km/h
- Anti-corrosion protection: Hot-dip galvanized (NMX-H-004-SCFI-2008)
- Application: Outdoor (Humid zones)
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 6 | STZ30G | 30 cm face width tower section |
| 1 | SCZ30PG | 30 cm tower top with lightning rod clamp |
| 1 | SBA30G | Base for 30 cm tower |
| 1 | SAB30G | Tower base anchor |
| 3 | SJB30G | Guy wire support flange |
| 3 | SAP02G | Ground anchor for guy wire |
| 18 | CUELLO-14-HDG | Thimble for guy wire |
| 54 | NUDO-316-FJG | 3/16' wire rope clip |
Guy wire not included.
We recommend 190 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters.
Turnbuckles not included.
We recommend 9 turnbuckles of 1/2' x 6'. (TEN1/2X6OGJ or TEN1/2X6OQJ).
**NOT using installation accessories such as flanges, tower bases, tower anchors, or guy anchors is considered a voiding of the equipment warranty, and any additional modifications are the sole responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. Type L810 |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp |
* Signaling standards dictate that the tower must be painted in 7 equal-sized bands; 4 orange-red bands and 3 white bands.
Lifeline system (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting hardware |
| 1 | S-GULV | Line guide |
| 20 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged cable clip |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer |
| 1 | SYS-USA7B | (Optional) Full body harness |
*NOM-009 mandates the use of systems that arrest accidental falls on a structure.
New! Lightning Rod Kit + Grounding with cable. Brand: LINKEDPRO (Not included)
KLP-TZ18-PRO. - All-inclusive! Ideal for 18m towers with crown dipole, wiring, and electrodes.
Alternatively, you can quote the following individual grounding or lightning rod components:
Recommended Grounding System for Tower and tower-mounted equipment (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic junction box |
| 3 | TGCR11 | Eye bolt connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | 1000A capacity grounding busbar (no cabinet) |
* We recommend using 4 AWG jacketed copper wire (SLY-287-GRN) for grounding the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Recommended Basic Lightning Rod System for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning Rod Tip with Aluminum Mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp Electrode with a bag of impedance-improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic inspection box |
| 1 | ANTIOX | Aerosol for terminal protection |
| 3 | TGCR11 | Eye bolt connector |
| 2 | TGAB18 | Rod connector |
| 12 | TGAC | Tower insulator |
*The dipole-type tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an installation of the electrode at a maximum of 3 meters from the tower, approximately 8 meters are used.
See the Grounding + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations
- Ensure the installation is performed by a trained professional
- Schedule a maintenance plan for checking guy wire tension and adjusting fasteners
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts
- A stress study must be performed when placing an eccentric load on the tower. This can cause excessive twisting and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white, in 7 bands of equal height starting and ending in orange-red (SYSCOM does not perform tower painting work)
- It is recommended to illuminate the tower, at least at the top, with a red lamp
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
