18 m Floor-Mounted Guyed Tower Kit with Electro-Galvanized STZ35 Section (Guy wires not included).
- $ 28,499.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35E-018
Key Features: Product manufactured under ISO 9001:2015 standard High elevation / Low cost. 100% Inspection of section-by-section assembly. Electrolytic galvanization according to ASTM B-633 standard. Ideal for dry, corrosion-free areas...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35E-018 , supplier:Syscom , syscom
Key Features:
- Product manufactured under ISO 9001:2015 standard
- High elevation / Low cost.
- 100% Inspection of section-by-section assembly.
- Electrolytic galvanization according to ASTM B-633 standard.
- Ideal for dry, corrosion-free areas
Physical Characteristics:
- Maximum Axial Load: 350 kg.
- Height: 18 meters (6 sections).
- Wind resistance: 200 km/h.
- Anti-corrosion protection: Electrolytic Galvanization (ASTM B-633).
- Application: Outdoor (Desert or low humidity areas)
Includes the following components:
| Quantity | Model | Description |
|---|---|---|
| 6 | STZ35 | Tower section, 35 cm face width. |
| 1 | SCZ35P | 35 cm tower top with set screw for lightning rod. |
| 1 | SBZ35 | 35 cm tower base. |
| 1 | SAB45 | Anchor for 35/45 tower base. |
| 2 | SJB35 | Guy wire attachment flange. |
| 3 | SAZ45 | Floor anchor for guy wire. |
| 12 | CUELLO-14-HDG | Thimble for guy wire |
| 36 | NUDO-316-FJG | 3/16' cable clamp. |
Guy wire not included. We recommend 130 meters of 3/16' guy wire (SRET-474-CAM or SRET-316-DA ) or larger diameters.
Turnbuckles not included. We recommend 6 turnbuckles of 5/8' x 9'. (TEN5/8X9OGJ or TEN5/8X9OQJ).
*Failure to use installation accessories such as flanges, tower base, tower anchor, or guy anchors will void the equipment warranty, and any additional adaptation is the installer's responsibility.
Complementary accessories (Not included):
Signaling/Lighting System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp |
*The signaling standard dictates that the tower must be painted in 7 equal-sized bands; 4 bands in reddish-orange and 3 in white.
Lifeline System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of attachment hardware |
| 1 | S-GULV | Line guide |
| 21 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged cable clamp |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 mandates the use of systems to prevent accidental falls on a structure.
Physical Grounding System Recommended for Tower and Equipment mounted on it (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic inspection pit. |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | Grounding bus bar with 1000A capacity insulators (No cabinet) |
* We recommend using 4 AWG insulated copper cable (SLY-287-GRN) for grounding from the electrode to the tower. For equipment on the tower, you may use 6 AWG (SLY-291-GRN).
Basic Lightning Rod System Recommended for Tower (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp electrode. With one bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic inspection well. |
| 1 | ANTIOX | Aerosol for terminal protection. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 12 | TGAC114 | Tower insulator. |
*The dipole-type tip provides a 72° protection cone under the coil. Recommended for low lightning incidence zones.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering a maximum installation distance of 3 meters for the electrode from the tower, approx. 8 meters are used.
View the physical grounding + lightning rod connection diagram in the following DIAGRAM.
Recommendations:
- Ensure the installation is performed by a trained professional.
- Schedule a maintenance plan to check guy wire tension and tighten hardware.
- Do not install solar panels at a height greater than 6 meters. Check the compatibility between solar cells and mounts.
- A stress study must be conducted when placing an eccentric load on the tower. This can cause excessive twisting and bending in the tower, leading to structural failure.
- The tower must be painted in an orange-red and white tone, in 7 stripes of equal height, starting and ending with orange-red (SYSCOM does not perform tower painting).
- It is recommended to light the tower at least at the tip with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
