21m Floor-Mounted Guyed Tower Kit with Galvanized STZ35 Section (Guy wires not included).
- $ 32,999.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35E-021
Key Features: Product manufactured under ISO 9001:2015 standards High elevation / Low cost 100% assembly inspection section by section Electrolytic galvanization in accordance with ASTM B-633 standards Ideal for dry,...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35E-021 , supplier:Syscom , syscom
Key Features:
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost
- 100% assembly inspection section by section
- Electrolytic galvanization in accordance with ASTM B-633 standards
- Ideal for dry, corrosion-free areas
Physical Specifications:
- Maximum Axial Load: 350 kg
- Height: 21 meters (7 sections)
- Wind Resistance: 200 km/h
- Anti-corrosive protection: Electrolytic Galvanization (ASTM B-633)
- Application: Outdoor (Desert or low-humidity areas)
Includes the following components:
| Quantity | Model | Description |
|---|---|---|
| 7 | STZ35 | Tower section with 35 cm face width |
| 1 | SCZ35P | 35 cm tower top cap with set screw for lightning rod |
| 1 | SBZ35 | 35 cm tower base |
| 1 | SAB45 | Anchor for 35/45 tower base |
| 3 | SJB35 | Guy wire clamp flange |
| 3 | SAZ45 | Ground anchor for guy wire |
| 18 | CUELLO-14-HDG | Thimble for guy wire |
| 54 | NUDO-316-FJG | 3/16' wire rope clip |
Guy wire not included. 215 meters of 3/16' guy wire is recommended (SRET-474-CAM or SRET-316-DA) or larger diameters.
Turnbuckles not included. 9 turnbuckles of 5/8' x 9' are recommended. (TEN5/8X9OGJ or TEN5/8X9OQJ).
**NOT using installation accessories such as flanges, tower base, tower anchor, or guy anchors will void the equipment warranty, and any additional modifications are the sole responsibility of the installer.**
Complementary accessories (Not included):
Signaling/Lighting System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Self-contained LED strobe with photocell, solar panel, and battery. Type L810 |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp |
*Signaling standards dictate that the tower must be painted with 7 equal-sized bands; 4 bands in international orange and 3 in white
Lifeline System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets |
| 1 | S-GULV | Line guide |
| 24 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged wire rope clip |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer |
| 1 | SYS-USA7B | (Optional) Suspension harness |
*NOM-009 mandates the use of fall arrest systems on any structure
Physical Grounding System Recommended for Tower and Mounted Equipment (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic access box |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | 1000A capacity ground bus bar with insulators (no enclosure) |
* Use of 4 AWG coated copper cable (SLY-287-GRN) is recommended for grounding the electrode to the tower. 6 AWG cable (SLY-291-GRN) may be used for equipment on the tower
Basic Lightning Protection System Recommended for Tower (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp electrode with a bag of impedance-improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic access box |
*The dipole-type tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used
See the Physical Ground + Lightning Rod connection diagram in the following DIAGRAM
Recommendations:
- Ensure the installation is performed by a trained professional
- Schedule a maintenance plan for checking guy wire tension and tightening hardware
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts
- A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white, in 7 stripes of equal height starting and ending with orange-red (SYSCOM does not perform tower painting work)
- It is recommended to light the tower at least at the top with a red lamp
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
