SYSCOM TOWERS
24 m Floor-Mounted Guyed Tower Kit with STZ35G Hot-Dip Galvanized Section (guy wires not included).
24 m Floor-Mounted Guyed Tower Kit with STZ35G Hot-Dip Galvanized Section (guy wires not included).
Couldn't load pickup availability
Featured Features:
- Product manufactured under ISO 9001:2015 standards.
- High elevation / Low cost.
- 100% inspection of section-by-section assembly.
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008.
- Ideal for coastal areas with high humidity or industrial areas.
Physical Features:
- Maximum Axial Load: 350 kg.
- Height: 24 meters (8 sections).
- Wind Resistance: 200 km/h.
- Anti-corrosion protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
- Application: Outdoors (Humid areas).
Includes the following components:
| Quantity | Model | Description |
| 8 | STZ35G | Tower section with 35 cm face width. |
| 1 | SCZ35PG | 35 cm tower top with set screw for lightning rod. |
| 1 | SBZ35G | Base for 35 cm tower. |
| 1 | SAB45G | Anchor for 35/45 tower base. |
| 3 | SJB35G | Guy wire attachment flange. |
| 3 | SAZ45G | Floor anchor for guy wire. |
| 18 | CUELLO-14-HDG | Thimble for guy wire |
| 54 | NUDO-316-FJG | 3/16' cable clamp. |
Guy wire not included. We recommend 240 meters of 3/16' guy wire (SRET-474-CAM or SRET-316-DA ) or larger diameters.
Turnbuckles not included. We recommend 9 5/8' x 9' turnbuckles. (TEN5/8X9OGJ or TEN5/8X9OQJ).
**The NON-use of installation accessories such as flanges, tower base, tower anchor, or guy wire anchors is considered a loss of equipment warranty, and any additional adaptation is the responsibility of the installer.**
Complementary accessories (Not included):
| Quantity | Model | Description |
| 2 | EIGSLSE | Autonomous LED strobe type with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mounting for EIGSLSE obstruction lamp |
*The signaling standard dictates that the tower must be painted in 7 stripes of equal size; 4 stripes in reddish-orange tone and 3 in white.
Lifeline system (Not included):
| Quantity | Model | Description |
| 1 | SHE-LV | Pair of fastening hardware |
| 1 | S-GULV | Line guide |
| 27 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | Forged 3/8' clamp |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety Carriage for Installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 marks as mandatory the use of systems that stop accidental falls on a structure.
Recommended Grounding System for Tower and Equipment mounted on it (Not included):
| Quantity | Model | Description |
| 1 | TG45AB | 45 A grounding electrode with Electrode, Filter, and H2Ohm Compound |
| 1 | S610 | Plastic inspection pit. |
| 3 | TGCR11 | Eye Connector |
| 2 | TGAB18 | Rod Connector |
| 1 | TGBUSG10 | Grounding Bus Bar with Insulators, 1000A Capacity (Without Cabinet) |
Basic Lightning Protection System Recommended for Tower (Not included):
| Quantity | Model | Description |
| 1 | TGTDPC | Lightning Rod with Aluminum Mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp Electrode with one bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic junction box. |
| 1 | ANTIOX | Aerosol for terminal protection. |
| 3 | TGCR11 | Eye Connector. |
| 2 | TGAB18 | Rod Connector. |
| 16 | TGAC114 | Insulator for tower. |
*2/0 gauge copper wire is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
Recommendations:
Ensure that the installation is performed by a trained professional.Schedule a maintenance plan to check guy wire tension and adjust bolts.
Do not install solar panels higher than 6 meters. Check the compatibility between solar cells and mounts.
A stress study must be conducted when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
The tower must be painted in reddish-orange and white, in 7 stripes of equal height starting and ending with reddish-orange (SYSCOM does not perform the tower painting work).
It is recommended to illuminate the tower at least at the top with a red lamp.





