30 m Floor-Mounted Guyed Tower Kit with Hot-Dip Galvanized STZ45G Section (Guy wires not included).
- $ 68,299.00
- Brand: SYSCOM TOWERS
- Availability: 5 In stock
- SKU: KTZ-45G-030
Key Features Product manufactured under ISO 9001:2015 standards Great Elevation / Low cost 100% Section-by-Section Assembly Inspection Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008 Ideal for high-humidity coastal zones or industrial...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-45G-030 , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards
- Great Elevation / Low cost
- 100% Section-by-Section Assembly Inspection
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008
- Ideal for high-humidity coastal zones or industrial areas
Physical Characteristics
- Maximum Axial Load: 500 kg
- Height: 30 meters (10 sections)
- Wind resistance: 200 km/h
- Anti-corrosion protection: Hot-dip galvanized (NMX-H-004-SCFI-2008)
- Application: Outdoor (Humid Zones)
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 10 | STZ45G | Tower section with 45 cm face width |
| 1 | SCZ45G | 45 cm tower top cap with lightning rod set screw |
| 1 | SBZ45G | Base for 45 cm tower |
| 1 | SAB45G | Anchor for 35/45 tower base |
| 4 | SJB45G | Guy wire bracket |
| 3 | SAZ45G | Floor anchor for guy wire |
| 24 | CUELLO-14-HDG | Thimble for guy wire |
| 72 | NUDO-14-FJG | 1/4' wire rope clip |
Guy wire not included. 385 meters of 1/4' guy wire (SRET-635-CAM) or larger diameters are recommended.
Turnbuckles not included. 12 turnbuckles of 5/8' x 9' are recommended. (TEN5/8X9OGJ or TEN5/8X9OQJ).
**Failure to use installation accessories such as Brackets, Tower Base, Tower Anchor, or Guy wire Anchors is considered a voiding of the equipment warranty, and any additional adaptation is the sole responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. Type L810 |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light |
* Signaling standards dictate that the tower must be painted in 7 equal-sized bands; 4 bands in orange-red and 3 in white.
Lifeline System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets |
| 2 | S-GULV | Line guide |
| 33 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged rope clip |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer |
| 1 | SYS-USA7B | (Optional) Suspension Harness |
* NOM-009 mandates the use of systems to arrest accidental falls on a structure.
Recommended Grounding System for Tower and Mounted Equipment (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45 A grounding electrode with Electrode, Filter, and H2Ohm compound |
| 1 | S610 | Plastic access box |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | 1000A capacity ground bus bar with insulators (No cabinet) |
* Use of 4 AWG insulated copper cable (SLY-287-GRN) is recommended for grounding the electrode to the tower. For equipment on the tower, 6 AWG cable (SLY-291-GRN) can be used.
Basic Lightning Protection System Recommended for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp. electrode with one bag of impedance-improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic inspection well |
| 1 | ANTIOX | Terminal protection spray |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 20 | TGAC114 | Tower insulator |
*The dipole-type tip offers a 72° protection cone below the coil. Recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for the integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
See the Grounding + Lightning Rod connection diagram in the following DIAGRAM
Recommendations
- Ensure that the installation is performed by a trained professional
- Schedule a maintenance plan to check guy wire tension and tighten hardware
- Do not install solar panels at a height of more than 6 meters. Check compatibility between solar cells and mounts
- A stress study must be performed when placing an eccentric load on the tower. This can cause excessive twisting and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending with orange-red (SYSCOM does not perform the tower painting work)
- It is recommended to illuminate the tower at least at the tip with a red lamp
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
