Skip to product information
1 of 1

SYSCOM TOWERS

30m Ground-Based Guyed Tower Kit with Hot-Dip Galvanized STZ30G Section (Guy wires not included).

30m Ground-Based Guyed Tower Kit with Hot-Dip Galvanized STZ30G Section (Guy wires not included).

Regular price $ 38,399.00
Regular price Sale price $ 38,399.00
Sale Sold out
Taxes included. Shipping calculated at checkout.
Quantity
Vendido por Glaretum, Proveedor de Servicio Autorizado Apple Paga con tarjeta, Apple Pay o PayPal ¿Dudas? Escríbenos por WhatsApp o llama al 800 461 0096

Logo SYSCOM TOWERS

Key Features

  • Product manufactured under ISO 9001:2015 standards.
  • High Elevation / Low Cost.
  • 100% section-by-section assembly inspection.
  • Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008.
  • Ideal for high-humidity coastal zones or industrial areas.

Physical Characteristics

  • Maximum Axial Load: 200 kg.
  • Height: 30 meters (10 sections).
  • Wind Resistance: 200 km/h.
  • Corrosion Protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
  • Application: Outdoor (Humid Zones).

Includes the following components

Quantity Model Description
10 STZ30G Tower section, 30 cm face width.
1 SCZ30PG 30 cm tower top with lightning rod clamp.
1 SBA30G 30 cm tower base.
1 SAB30G Tower base anchor.
5 SJB30G Guy wire support bracket.
3 SAP02G Ground anchor for guy wire.
30 CUELLO-14-HDG Guy wire thimble.
90 NUDO-316-FJG 3/16" wire rope clip.

Guy wire not included. 480 meters of 1/8" guy wire (SRET-318-CAM) or larger diameters are recommended.

Turnbuckles not included. 15 turnbuckles (1/2" x 6") are recommended (TEN1/2X6OGJ or TEN1/2X6OQJ).

**Failure to use installation accessories such as brackets, tower base, tower anchor, or guy wire anchors will be considered a voidance of the equipment warranty, and any additional modifications remain the responsibility of the installer.**

Complementary accessories (Not included)

Signaling/Lighting System (Not included)

Quantity Model Description
2 EIGSLSE Self-contained LED strobe light with photocell, solar panel, and battery. Type L810.
2 HLU3R2 Mounting bracket for EIGSLSE obstruction light

* Signaling standards dictate that the tower must be painted in 7 stripes of equal size; 4 orange-red stripes and 3 white stripes.

Lifeline system (Not included)

Quantity Model Description
1 SHE-LV Pair of mounting brackets
1 S-GULV Line guide
33 SRET-338CAM 3/8" cable
6 NUDO-38FJG 3/8" forged wire rope clip
2 CUELLO-38-HDG 3/8" thimble
1 TRY-ACC-SLIDER (Optional) Safety slider for installer.
1 SYS-USA7B (Optional) Suspension harness.

* NOM-009 mandates the use of systems that stop accidental falls on a structure.

New! Lightning Rod Kit + Grounding with cable. LINKEDPRO brand (Not included)

KLP-TZ30-PRO - All included! Ideal for 30m towers with crown dipole, wiring, and electrodes.

Alternatively, you can quote the following individual grounding or lightning rod components:

Grounding system recommended for tower and mounted equipment (Not included)

Quantity Model Description
1 TG45AB 45 A grounding electrode with electrode, filter, and H2Ohm compound
1 S610 Plastic junction box.
3 TGCR11 Eye connector
2 TGAB18 Ground rod connector
1 TGBUSG10 1000A capacity busbar with insulators (without enclosure)

* The use of 4 AWG coated copper cable (SLY-287-GRN) is recommended for grounding from the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.

Basic Lightning Rod System recommended for Tower (Not included)

Quantity Model Description
1 TGTDPC Lightning rod tip with aluminum mast (MASTIL1.2)
1 TG45AB 45 Amp electrode. With a bag of impedance-improving compound (H2OHM), compass, and level.
1 S610 Small plastic inspection box.
1 ANTIOX Spray for terminal protection.
3 TGCR11 Eye connector.
2 TGAB18 Rod connector.
20 TGAC Tower insulator.

*The dipole-type tip offers a 72° protection cone below the coil. Recommended for areas with low lightning incidence.

A 2/0 gauge copper cable is recommended for the integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.

See the Grounding + Lightning Rod connection diagram in the following DIAGRAM.

Recommendations

  • Ensure the installation is performed by a trained professional.
  • Schedule a maintenance plan for checking guy wire tension and adjusting hardware.
  • Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts.
  • A stress study must be performed when placing an eccentric load on the tower. This can cause excessive torsion and bending in the tower, resulting in structural failure.
  • The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending with orange-red (SYSCOM does not provide tower painting services).
  • It is recommended to illuminate the tower at least at the top with a red lamp.

Representative Diagram: Guy Wire Installation Version 2.0

Guy wire installation diagram version 2.0

Installation Images

Tower installation images
View full details