33 m Floor-Mounted Guyed Tower Kit with Electro-Galvanized STZ35 Section (Guy wires not included).
- $ 46,999.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35E-033
Key Features Product manufactured under ISO 9001:2015 standards High elevation / Low cost 100% assembly inspection, section by section Electrolytic galvanized in accordance with ASTM B-633 standards Ideal for dry...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35E-033 , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost
- 100% assembly inspection, section by section
- Electrolytic galvanized in accordance with ASTM B-633 standards
- Ideal for dry areas free of corrosion
Physical Characteristics
- Maximum Axial Load: 350 Kg
- Height: 33 meters (11 sections)
- Wind resistance: 200 km/hr
- Anticorrosive protection: Electrolytic Galvanized (ASTM B-633)
- Application: Outdoor (Desert or low-humidity zones)
Kit Components
| Quantity | Model | Description |
|---|---|---|
| 11 | STZ35 | 35 cm face width tower section |
| 1 | SCZ35P | 35 cm tower top with lightning rod clamp |
| 1 | SBZ35 | 35 cm tower base |
| 1 | SAB45 | Anchor for 35/45 tower base |
| 4 | SJB35 | Guy wire clamp |
| 3 | SAZ45 | Floor anchor for guy wire |
| 24 | CUELLO-14-HDG | Thimble for guy wire |
| 72 | NUDO-316-FJG | 3/16' cable clip (wire rope clamp) |
Guy wire not included. 420 meters of 3/16' guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters are recommended.
Turnbuckles not included. 12 5/8' x 9' turnbuckles are recommended. (TEN5/8X9OGJ or TEN5/8X9OQJ).
*Failure to use installation accessories such as clamps, tower base, tower anchor, or guy anchors will void the equipment warranty, and any additional modifications are the sole responsibility of the installer.
Complementary Accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Self-contained LED strobe with photocell, solar panel, and battery. Type L810 |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light |
*Signaling standards dictate that the tower must be painted in 7 equal-sized bands; 4 reddish-orange bands and 3 white bands.
Safety Cable/Lifeline System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening brackets |
| 2 | S-GULV | Cable guide |
| 36 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged cable clip |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer |
| 1 | SYS-USA7B | (Optional) Suspension harness |
*NOM-009 mandates the use of fall arrest systems for structures.
Recommended Grounding System for Tower and Mounted Equipment
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic access box |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | 1000A capacity junction bar with insulators (no cabinet) |
* It is recommended to use 4 AWG jacketed copper cable (SLY-287-GRN) for grounding from the electrode to the tower. For equipment on the tower, 6 AWG cable (SLY-291-GRN) can be used.
Recommended Basic Lightning Protection System for Tower
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp. electrode with a bag of impedance-improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic access box |
| 1 | ANTIOX | Spray for terminal protection |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 22 | TGAC114 | Tower insulator |
*The dipole-type tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Assuming electrode installation at a maximum of 3 meters from the tower, approximately 8 meters are needed.
Recommendations
- Ensure that the installation is performed by a trained professional
- Schedule a maintenance plan for checking guy wire tension and tightening hardware
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts
- A stress analysis must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure
- The tower must be painted in international orange and white, in 7 stripes of equal height starting and ending with orange (SYSCOM does not perform tower painting work)
- It is recommended to illuminate the tower at least at the top with a red light
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
