33 m Floor-Mounted Guyed Tower Kit with Hot-Dip Galvanized STZ35G Section (Guy wire not included).
- $ 58,899.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35G-033
Key Features: Product manufactured under ISO 9001:2015 standards. High elevation / Low cost. 100% inspection of assembly section by section. Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008. Ideal for high-humidity coastal...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35G-033 , supplier:Syscom , syscom
Key Features:
- Product manufactured under ISO 9001:2015 standards.
- High elevation / Low cost.
- 100% inspection of assembly section by section.
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008.
- Ideal for high-humidity coastal areas or industrial zones.
Physical Characteristics:
- Maximum Axial Load: 350 kg.
- Height: 33 meters (11 sections).
- Wind resistance: 200 km/h.
- Corrosion protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
- Application: Outdoor (Humid zones).
Includes the following components:
| Quantity | Model | Description |
|---|---|---|
| 11 | STZ35G | Tower section with 35 cm face width. |
| 1 | SCZ35PG | 35 cm tower top cap with lightning rod clamp. |
| 1 | SBZ35G | Base for 35 cm tower. |
| 1 | SAB45G | Anchor for 35/45 tower base. |
| 4 | SJB35G | Guy wire clamp. |
| 3 | SAZ45G | Floor anchor for guy wire. |
| 24 | CUELLO-14-HDG | Thimble for guy wire. |
| 72 | NUDO-316-FJG | 3/16" wire rope clip. |
Guy wire not included. We recommend 420 meters of 3/16" guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters.
Turnbuckles not included. We recommend 12 5/8" x 9" turnbuckles (TEN5/8X9OGJ or TEN5/8X9OQJ).
**Failure to use installation accessories such as clamps, tower base, tower anchor, or guy anchors will result in the loss of the equipment warranty, and any additional adaptation is the responsibility of the installer.**
Complementary accessories (Not included):
Signaling/Lighting System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Self-contained LED beacon with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp. |
*Signaling standards dictate that the tower must be painted in 7 bands of equal size; 4 orange-red bands and 3 white bands.
Lifeline system (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening brackets. |
| 2 | S-GULV | Line guide. |
| 36 | SRET-338CAM | 3/8" cable. |
| 6 | NUDO-38FJG | 3/8" forged clip. |
| 2 | CUELLO-38-HDG | 3/8" thimble. |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 mandates the use of systems that arrest accidental falls on a structure.
Recommended Grounding System for Tower and Mounted Equipment (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound. |
| 1 | S610 | Plastic access box. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 1 | TGBUSG10 | Ground bus bar with 1000A capacity insulators (without cabinet). |
* It is recommended to use 4 AWG coated copper cable (SLY-287-GRN) for grounding from the electrode to the tower. For equipment on the tower, 6 AWG cable (SLY-291-GRN) may be used.
Recommended Basic Lightning Protection System for Tower (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning Rod Tip with Aluminum Mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp Electrode. Includes one bag of impedance improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic inspection well. |
| 1 | ANTIOX | Aerosol for terminal protection. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Connector for rod. |
| 22 | TGAC114 | Insulator for tower. |
*The dipole-type tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
DIAGRAM for Grounding + Lightning Rod connection.
Recommendations:
- Ensure that the installation is performed by a trained professional.
- Schedule a maintenance plan to check guy wire tension and adjust hardware.
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts.
- A stress study must be performed when placing an eccentric load on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending with orange-red (SYSCOM does not perform tower painting).
- It is recommended to light the tower at least at the top with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
