36m Ground-Mounted Guyed Tower Kit with STZ35 Electro-Galvanized Section (Guy wires not included).
- $ 50,099.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35E-036
Highlighted Features: Product manufactured under ISO 9001:2015 standards. High elevation / Low cost. 100% section-by-section assembly inspection. Electrolytic galvanization in accordance with ASTM B-633 standards. Ideal for dry, corrosion-free zones....
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35E-036 , supplier:Syscom , syscom
Highlighted Features:
- Product manufactured under ISO 9001:2015 standards.
- High elevation / Low cost.
- 100% section-by-section assembly inspection.
- Electrolytic galvanization in accordance with ASTM B-633 standards.
- Ideal for dry, corrosion-free zones.
Physical Features:
- Maximum Axial Load: 350 kg.
- Height: 36 meters (12 sections).
- Wind resistance: 200 km/hr.
- Anticorrosive protection: Electrolytic Galvanization (ASTM B-633).
- Application: Outdoor (Desert or low-humidity zones).
Includes the following components:
| Quantity | Model | Description |
|---|---|---|
| 12 | STZ35 | Tower section with 35 cm face width. |
| 1 | SCZ35P | 35 cm tower top cap with lightning rod set screw. |
| 1 | SBZ35 | 35 cm tower base. |
| 1 | SAB45 | Anchor for 35/45 tower base. |
| 4 | SJB35 | Guy wire attachment bracket. |
| 3 | SAZ45 | Ground anchor for guy wire. |
| 24 | CUELLO-14-HDG | Thimble for guy wire. |
| 72 | NUDO-316-FJG | 3/16" wire rope clip. |
Guy wire not included.
We recommend 450 meters of 3/16" guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters.
Turnbuckles not included. We recommend 12 5/8" x 9" turnbuckles (TEN5/8X9OGJ or TEN5/8X9OQJ).
*NOT using installation accessories such as Brackets, Tower Base, Tower Anchor, or Guy Anchors will void the equipment warranty, and any additional modifications are the responsibility of the installer.
Complementary accessories (Not included):
Signaling/Lighting System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Self-contained LED beacon with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light. |
*The signaling standard dictates that the tower must be painted with 7 stripes of equal size; 4 orange-red stripes and 3 white stripes.
Lifeline system (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets. |
| 2 | S-GULV | Line guide. |
| 39 | SRET-338CAM | 3/8" cable. |
| 6 | NUDO-38FJG | 3/8" forged wire rope clip. |
| 2 | CUELLO-38-HDG | 3/8" thimble. |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 makes the use of fall-arrest systems mandatory for structures.
Recommended Physical Grounding System for Tower and Mounted Equipment (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45 A grounding electrode with Electrode, Filter, and H2Ohm compound. |
| 1 | S610 | Plastic junction box. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 1 | TGBUSG10 | Grounding bus bar with insulators, 1000A capacity (without cabinet). |
* We recommend using 4 AWG copper jacketed cable (SLY-287-GRN) for grounding from the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Recommended Basic Lightning Rod System for Tower (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2). |
| 1 | TG45AB | 45 Amp. electrode with a bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic junction box. |
| 1 | ANTIOX | Aerosol for terminal protection. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 24 | TGAC114 | Tower insulator. |
*The dipole-type tip offers a 72° cone of protection below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approximately 8 meters are used.
See the Physical Ground + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations:
- Ensure that the installation is performed by a trained professional.
- Schedule a maintenance plan for checking guy wire tension and tightening hardware.
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts.
- A stress study must be performed when placing an eccentric load on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending in orange-red (SYSCOM does not perform tower painting).
- It is recommended to illuminate the tower at least at the tip with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
