36m Ground-Based Guyed Tower Kit with Hot-Dip Galvanized STZ35G Section (Guy wires not included).
- $ 62,899.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35G-036
Key Features Product manufactured Under ISO 9001:2015 Standard. High Elevation / Low cost. 100% Section-by-Section Assembly Inspection. Hot-Dip Galvanized in accordance with NMX-H-004-SCFI-2008. Ideal for high-humidity coastal areas or industrial...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35G-036 , supplier:Syscom , syscom
Key Features
- Product manufactured Under ISO 9001:2015 Standard.
- High Elevation / Low cost.
- 100% Section-by-Section Assembly Inspection.
- Hot-Dip Galvanized in accordance with NMX-H-004-SCFI-2008.
- Ideal for high-humidity coastal areas or industrial zones.
Physical Characteristics
- Maximum Axial Load: 350 kg.
- Height: 36 meters (12 sections).
- Wind Resistance: 200 km/hr.
- Anti-corrosive Protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
- Application: Outdoor (Humid Zones).
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 12 | STZ35G | 35 cm face-width tower section. |
| 1 | SCZ35PG | 35 cm tower top cap with lightning rod set screw. |
| 1 | SBZ35G | 35 cm tower base. |
| 1 | SAB45G | Anchor for 35/45 tower base. |
| 4 | SJB35G | Guy wire support bracket. |
| 3 | SAZ45G | Floor anchor for guy wire. |
| 24 | CUELLO-14-HDG | Thimble for guy wire. |
| 72 | NUDO-316-FJG | 3/16" wire rope clip. |
Does not include guy wire. 450 meters of 3/16" guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters are recommended.
Does not include turnbuckles. 12 5/8" x 9" turnbuckles are recommended. (TEN5/8X9OGJ or TEN5/8X9OQJ).
Failure to use installation accessories such as brackets, tower base, tower anchor, or guy wire anchors will void the equipment warranty, and any additional modifications are the sole responsibility of the installer.
Complementary accessories (Not included)
Signaling/Lighting System Not included
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. L810 type. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp. |
* The signaling standard dictates that the tower must be painted with 7 bands of equal size; 4 bands in reddish-orange and 3 in white.
Lifeline system Not included
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets. |
| 2 | S-GULV | Line guide. |
| 39 | SRET-338CAM | 3/8" cable. |
| 6 | NUDO-38FJG | 3/8" forged rope clip. |
| 2 | CUELLO-38-HDG | 3/8" thimble. |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
* NOM-009 mandates the use of fall protection systems on structures.
Grounding System Recommended for Tower and Mounted Equipment Not included
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45 A grounding electrode with Electrode, Filter, and H2Ohm compound. |
| 1 | S610 | Plastic junction box. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 1 | TGBUSG10 | 1000A capacity busbar with insulators (No cabinet). |
* 4 AWG coated copper cable (SLY-287-GRN) is recommended for grounding from the electrode to the tower. For equipment on the tower, 6 AWG cable (SLY-291-GRN) can be used.
Basic Lightning Protection System Recommended for Tower Not included
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2). |
| 1 | TG45AB | 45 Amp electrode. With one bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic inspection box. |
| 1 | ANTIOX | Terminal protection spray. |
| 3 | TGCR11 | Eye terminal connector. |
| 2 | TGAB18 | Ground rod connector. |
| 24 | TGAC114 | Tower insulator. |
*The dipole-type tip offers a 72° protection cone under the coil. Recommended for areas with low lightning incidence.
*2/0 gauge copper wire is recommended for the integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
See the Grounding + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations
- Ensure that the installation is performed by a trained professional.
- Schedule a maintenance plan to check guy wire tension and tighten hardware.
- Do not install solar panels more than 6 meters high. Check compatibility between solar cells and mounts.
- A stress study must be performed when placing an eccentric load on the tower. This can cause excessive twisting and bending in the tower, leading to structural failures.
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending with orange-red (SYSCOM does not perform tower painting work).
- It is recommended to illuminate the tower, at least at the tip, with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
