39 m Floor-Mounted Guyed Tower Kit with Galvanized STZ35 Section (Guy wires not included).
- $ 54,599.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35E-039
Key Features: Product manufactured under ISO 9001:2015 standard High elevation / Low cost 100% Inspection of section-by-section assembly Electrolytic galvanization according to ASTM B-633 standard Ideal for dry, corrosion-free areas...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35E-039 , supplier:Syscom , syscom
Key Features:
- Product manufactured under ISO 9001:2015 standard
- High elevation / Low cost
- 100% Inspection of section-by-section assembly
- Electrolytic galvanization according to ASTM B-633 standard
- Ideal for dry, corrosion-free areas
Physical Characteristics:
- Maximum Axial Load: 350 kg
- Height: 39 meters (13 sections)
- Wind resistance: 200 km/hr
- Anti-corrosive protection: Electrolytic galvanization (ASTM B-633)
- Application: Outdoor (desert or low-humidity zones)
Includes the following components:
| Quantity | Model | Description |
|---|---|---|
| 13 | STZ35 | 35 cm face width tower section |
| 1 | SCZ35P | 35 cm tower top with lightning rod set screw |
| 1 | SBZ35 | Base for 35 cm tower |
| 1 | SAB45 | Anchor for 35/45 tower base |
| 5 | SJB35 | Guy wire bracket |
| 3 | SAZ45 | Floor anchor for guy wire |
| 30 | CUELLO-14-HDG | Thimble for guy wire |
| 90 | NUDO-316-FJG | 3/16' cable clamp |
Guy wire not included. We recommend 600 meters of 3/16' guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters.
Turnbuckles not included. We recommend 15 turnbuckles of 5/8' x 9'. (TEN5/8X9OGJ or TEN5/8X9OQJ).
**NOT using installation accessories such as brackets, tower base, tower anchor, or guy anchors is considered a forfeiture of the equipment warranty, and any additional modification is the responsibility of the installer.**
Complementary accessories (Not included):
Signaling/Lighting System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe light with photocell, solar panel, and battery. Type L810 |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp |
*Signaling standards dictate that the tower must be painted in 7 bands of equal size; 4 bands in reddish-orange and 3 in white.
Lifeline system (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening brackets |
| 2 | S-GULV | Line guide |
| 42 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged clamp |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety carriage for installer |
| 1 | SYS-USA7B | (Optional) Suspension harness |
*NOM-009 mandates the use of systems that arrest accidental falls on a structure.
Recommended Grounding System for Tower and Equipment mounted on it (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45 A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic access box |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | 1000A capacity junction bar with insulators (without cabinet) |
*The use of 4 AWG coated copper cable (SLY-287-GRN) is recommended for grounding the electrode to the tower. For equipment on the tower, 6 AWG cable (SLY-291-GRN) can be used.
Recommended Basic Lightning Protection System for Tower (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp. electrode with a bag of impedance-improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic access box |
| 1 | ANTIOX | Terminal protection spray |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 26 | TGAC114 | Tower insulator |
*The dipole-type tip offers a 72° protection cone under the coil. Recommended for areas with low lightning incidence.
2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
See the Physical Ground + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations:
- Ensure that the installation is performed by a trained professional
- Schedule a maintenance plan for checking guy wire tension and tightening hardware
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts
- A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white tones, in 7 stripes of equal height starting and ending with orange-red (SYSCOM does not perform tower painting work)
- It is recommended to illuminate the tower, at least at the tip, with a red lamp
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
