42 m Floor-Mounted Guyed Tower Kit with Galvanized STZ35 Section (Guy wires not included).
- $ 57,799.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35E-042
Key Features Product manufactured under ISO 9001:2015 standards High elevation / Low cost 100% section-by-section assembly inspection Electrolytic galvanization according to ASTM B-633 standards Ideal for dry, corrosion-free areas Physical...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35E-042 , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost
- 100% section-by-section assembly inspection
- Electrolytic galvanization according to ASTM B-633 standards
- Ideal for dry, corrosion-free areas
Physical Characteristics
- Maximum Axial Load: 350 kg
- Height: 42 meters (14 sections)
- Wind Resistance: 200 km/hr
- Anti-corrosive protection: Electrolytic Galvanization (ASTM B-633)
- Application: Outdoor (Desert areas or low humidity)
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 14 | STZ35 | 35 cm face width tower section |
| 1 | SCZ35P | 35 cm tower top with lightning rod clamp |
| 1 | SBZ35 | 35 cm tower base |
| 1 | SAB45 | Anchor for 35/45 tower base |
| 5 | SJB35 | Guy wire support clamp |
| 3 | SAZ45 | Floor anchor for guy wire |
| 30 | CUELLO-14-HDG | Thimble for guy wire |
| 90 | NUDO-316-FJG | 3/16" wire rope clip |
Guy wire not included. We recommend 650 meters of 3/16" guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters.
Turnbuckles not included. We recommend 15 turnbuckles of 5/8" x 9" (TEN5/8X9OGJ or TEN5/8X9OQJ).
**Failure to use installation accessories such as clamps, tower base, tower anchor, or guy wire anchors will be considered a voiding of the equipment warranty, and any additional adaptation is the responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe light with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mounting for EIGSLSE obstruction light. |
*Signaling standards dictate that the tower must be painted in 7 stripes of equal size; 4 orange-red stripes and 3 white stripes.
Lifeline system (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets. |
| 2 | S-GULV | Guide for lifeline. |
| 45 | SRET-338CAM | 3/8" cable. |
| 6 | NUDO-38FJG | 3/8" forged clip. |
| 2 | CUELLO-38-HDG | 3/8" thimble. |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 mandates the use of systems that prevent accidental falls on a structure.
Recommended Grounding System for Tower and Mounted Equipment (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound. |
| 1 | S610 | Plastic access box. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 1 | TGBUSG10 | Ground bus bar with 1000A capacity insulators (No cabinet). |
* We recommend using 4 AWG coated copper wire (SLY-287-GRN) for grounding the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Recommended Basic Lightning Protection System for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod with aluminum mast (MASTIL1.2). |
| 1 | TG45AB | 45 Amp electrode. With one bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 |
*The dipole-type tip provides a 72° cone of protection below the coil. It is recommended for areas with low lightning incidence
*A 2/0 AWG copper cable is recommended for the integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approximately 8 meters are used
See the Physical Ground + Lightning Rod connection diagram in the following DIAGRAM
Recommendations
- Ensure that the installation is performed by a trained professional
- Schedule a maintenance plan to check guy wire tension and tighten hardware
- Do not install solar panels at a height greater than 6 meters. Check the compatibility between solar cells and mounts
- A stress study must be conducted when placing an eccentric load on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white, in 7 stripes of equal height starting and ending in orange-red (SYSCOM does not perform tower painting work)
- It is recommended to light the tower at least at the top with a red lamp
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
