6 m Floor-Mounted Guyed Tower Kit with Hot-Dip Galvanized STZ30G Section. (Guy wires not included).
- $ 12,199.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-30G-006
Key Features Product manufactured under ISO 9001:2015 standards High Elevation / Low cost 100% Section-by-Section Assembly Inspection Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008 Ideal for coastal areas with high humidity...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-30G-006 , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards
- High Elevation / Low cost
- 100% Section-by-Section Assembly Inspection
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008
- Ideal for coastal areas with high humidity or industrial zones
Physical Characteristics
- Maximum Axial Load: 200 kg
- Height: 6 meters (2 sections)
- Wind resistance: 200 km/hr
- Anti-corrosion protection: Hot-dip galvanized (NMX-H-004-SCFI-2008)
- Application: Outdoor (Humid Zones)
Guy wire not included. 32 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters are recommended.
Turnbuckles not included. 3 turnbuckles of 1/2' x 6' are recommended. (TEN1/2X6OGJ or TEN1/2X6OQJ).
*NOT using installation accessories such as flanges, tower base, tower anchor, or guy anchors is considered a forfeiture of the equipment warranty, and any additional adaptation is the responsibility of the installer.
* It is recommended to use 4 AWG insulated copper wire (SLY-287-GRN) to ground the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
*NOM-009 mandates the use of fall-arrest systems for work on a structure.
*The dipole-type tip offers a 72° protection cone under the coil. It is recommended for low lightning incidence zones.
*2/0 gauge copper wire is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approximately 8 meters are used.
See connection diagram for Physical Ground + Lightning Rod: DIAGRAM
Recommendations
- Ensure installation is performed by a trained professional
- Schedule a maintenance plan to check guy wire tension and tighten hardware
- Do not install solar panels higher than 6 meters. Check compatibility between solar cells and mounts
- A stress analysis must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending in orange-red (SYSCOM does not perform tower painting)
- It is recommended to light the tower at least at the top with a red lamp
New! Lightning Rod + Grounding Kit with Cable. LINKEDPRO Brand (Not included)
KLP-TZ06-PRO - All-inclusive! Ideal for 6m towers with corona dipole, wiring, and electrodes.
Or you can also quote the following grounding or lightning rod components individually: