6m Floor-Mounted Guyed Tower Kit with Galvanized STZ35 Section (Guy wires not included).
- $ 14,499.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35E-006
Key Features: Product manufactured under ISO 9001:2015 standards High elevation / Low cost 100% inspection of section-by-section assembly Electrolytic galvanization ASTM B-633 Ideal for dry, corrosion-free areas Physical Characteristics: Maximum...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35E-006 , supplier:Syscom , syscom
Key Features:
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost
- 100% inspection of section-by-section assembly
- Electrolytic galvanization ASTM B-633
- Ideal for dry, corrosion-free areas
Physical Characteristics:
- Maximum axial load: 350 kg
- Height: 6 meters (2 sections)
- Wind resistance: 200 km/h
- Anti-corrosion protection: Electrolytic galvanization (ASTM B-633)
- Application: Outdoor (desert or low-humidity areas)
Includes the following components:
| Quantity | Model | Description |
|---|---|---|
| 2 | STZ35 | Tower section with 35 cm face width |
| 1 | SCZ35P | 35 cm tower top with lightning rod set screw |
| 1 | SBZ35 | Base for 35 cm tower |
| 1 | SAB45 | Anchor for 35/45 tower base |
| 1 | SJB35 | Guy wire support flange |
| 3 | SAZ45 | Ground anchor for guy wire |
| 6 | CUELLO-14-HDG | Guy wire thimble |
| 18 | NUDO-316-FJG | 3/16" wire rope clip |
Does not include guy wire. 32 meters of 3/16' guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters are recommended.
Does not include turnbuckles. 3 5/8' x 9' turnbuckles are recommended. (TEN5/8X9OGJ or TEN5/8X9OQJ).
* Failure to use original installation accessories such as flanges, tower base, tower anchor, or guy wire anchors is considered a voiding of the equipment warranty, and any additional modifications are the responsibility of the installer.
Complementary accessories (Not included):
Signaling/Lighting system (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Self-contained LED strobe with photocell, solar panel, and battery. Type L810 |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp |
* The signaling standard dictates that the tower must be painted in 7 equal-sized bands; 4 bands in orange-red and 3 in white.
Lifeline system (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets |
| 1 | S-GULV | Line guide |
| 9 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged clip |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer |
| 1 | SYS-USA7B | (Optional) Suspension harness |
* NOM-009 mandates the use of systems to arrest accidental falls on a structure.
Grounding system recommended for the tower and equipment mounted on it (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic access box |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | Grounding bus bar with insulators, 1000A capacity (without cabinet) |
Note: The use of 4 AWG jacketed copper wire (SLY-287-GRN) is recommended for grounding the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Basic lightning protection system recommended for the tower (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp electrode with a bag of impedance improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic inspection well |
| 1 | ANTIOX | Protective aerosol spray for terminals |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 4 | TGAC114 | Tower insulator |
*The dipole-type tip offers a 72° cone of protection below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering a maximum distance of 3 meters from the tower for electrode installation, approximately 8 meters are used.
View grounding + lightning rod connection diagram: DIAGRAM
Recommendations:
- Ensure that the installation is performed by a trained professional
- Schedule a maintenance plan for checking guy wire tension and adjusting fasteners
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts
- A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending with orange-red (SYSCOM does not perform tower painting)
- It is recommended to illuminate the tower, at least at the top, with a red lamp
Representative diagram: Guy wire installation version 2.0
Installation images
