6 m Guyed Ground Tower Kit with Hot-Dip Galvanized STZ35G Section (Guy wire not included).
- $ 18,399.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35G-006
Key Features Product manufactured under ISO 9001:2015 standards High elevation / Low cost. 100% inspection of section-by-section assembly. Hot-dip galvanized according to NMX-H-004-SCFI-2008 Ideal for high-humidity coastal areas or industrial...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35G-006 , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost.
- 100% inspection of section-by-section assembly.
- Hot-dip galvanized according to NMX-H-004-SCFI-2008
- Ideal for high-humidity coastal areas or industrial zones.
Physical Characteristics
- Maximum Axial Load: 350 kg.
- Height: 6 meters (2 sections).
- Wind resistance: 200 km/h.
- Anti-corrosive protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
- Application: Outdoor (Humid zones).
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 2 | STZ35G | Tower section with 35 cm face width. |
| 1 | SCZ35PG | 35 cm tower top with lightning rod set screw. |
| 1 | SBZ35G | 35 cm tower base. |
| 1 | SAB45G | Anchor for 35/45 tower base. |
| 1 | SJB35G | Guy wire tensioning bracket. |
| 3 | SAZ45G | Floor anchor for guy wire. |
| 6 | CUELLO-14-HDG | Thimble for guy wire |
| 18 | NUDO-316-FJG | 3/16" wire rope clip. |
Guy wire not included. 32 meters of 3/16" guy wire (SRET-474-CAM or SRET-316-DA) or larger diameters are recommended.
Turnbuckles not included. 3 turnbuckles of 5/8" x 9" are recommended (TEN5/8X9OGJ or TEN5/8X9OQJ).
Important: NOT using installation accessories such as Brackets, Tower Base, Tower Anchor, or Guy Wire Anchors is considered a voiding of the equipment warranty, and any additional modifications are the sole responsibility of the installer.
Supplementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mounting for EIGSLSE obstruction light |
* The signaling standard dictates that the tower must be painted in 7 equal-sized bands; 4 bands in reddish-orange and 3 in white.
Lifeline System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening brackets |
| 1 | S-GULV | Line guide |
| 9 | SRET-338CAM | 3/8" cable |
| 6 | NUDO-38FJG | 3/8" forged wire rope clip |
| 2 | CUELLO-38-HDG | 3/8" thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety carriage for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
* NOM-009 mandates the use of systems to prevent accidental falls when working on a structure.
Grounding System Recommended for Tower and Equipment Mounted on it (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with Electrode, Filter, and H2Ohm compound |
| 1 | S610 | Plastic inspection box. |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | Busbar with insulators, 1000A capacity (without cabinet) |
* The use of 4 AWG copper-clad cable (SLY-287-GRN) is recommended for grounding from the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Basic Lightning Protection System Recommended for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp. electrode with a bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic inspection box. |
| 1 | ANTIOX | Aerosol for terminal protection. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 4 | TGAC114 | Tower insulator. |
*The dipole-type tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
See the connection diagram for Physical Ground + Lightning Rod in the following DIAGRAM.
Recommendations
- Ensure the installation is performed by a trained professional.
- Schedule a maintenance plan for checking guy wire tension and adjusting hardware.
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts.
- A stress analysis must be performed when placing an eccentric load on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
- The tower must be painted in orange-red and white, in 7 stripes of equal height starting and ending with orange-red (SYSCOM does not perform tower painting).
- It is recommended to illuminate the tower at least at the tip with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
