9 m Floor-Mounted Guyed Tower Kit with STZ30 Electro-Galvanized Section (Guy wires not included).
- $ 9,999.00
- Brand: SYSCOM TOWERS
- Availability: 2 In stock
- SKU: KTZ-30E-009
Key Features Product manufactured under ISO 9001:2015 standards High elevation / Low cost. 100% section-by-section assembly inspection. Electrolytic galvanizing in accordance with ASTM B-633 standards. Ideal for dry, corrosion-free areas....
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-30E-009 , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost.
- 100% section-by-section assembly inspection.
- Electrolytic galvanizing in accordance with ASTM B-633 standards.
- Ideal for dry, corrosion-free areas.
Physical Characteristics
- Maximum Axial Load: 200 kg.
- Height: 9 meters (3 sections).
- Wind Resistance: 200 km/h.
- Anti-corrosion protection: Electrolytic Galvanizing (ASTM B-633).
- Application: Outdoors (desert or low humidity areas).
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 3 | STZ30 | Tower section with 30 cm face width. |
| 1 | SCZ30P | 30 cm tower top with lightning rod clamp. |
| 1 | SBA30 | Base for 30 cm tower. |
| 1 | SAB30 | Anchor for tower base. |
| 2 | SJB30 | Guy wire clamping flange. |
| 3 | SAP02 | Floor anchor for guy wire. |
| 12 | CUELLO-14-HDG | Thimble for guy wire |
| 36 | NUDO-316-FJG | 3/16' cable clip. |
Guy wire not included. We recommend 75 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters.
Turnbuckles not included. We recommend 6 turnbuckles of 1/2' x 6'. (TEN1/2X6OGJ or TEN1/2X6OQJ).
**Failure to use installation accessories such as flanges, tower base, tower anchor, or guy anchors will void the equipment warranty, and any additional modifications are the sole responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting system (Not included)
Lifeline system (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets |
| 1 | S-GULV | Line guide |
| 12 | SRET-338 | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged cable clip |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 mandates the use of systems to prevent accidental falls from a structure.
New! Lightning Rod + Grounding kit with cable. LINKEDPRO brand (Not included)
KLP-TZ09-PRO .- All included! Ideal for 9 m towers with crown dipole, wiring, and electrodes.
Or you may individually quote the following Grounding or Lightning rod components:
Recommended Grounding System for Tower and Mounted Equipment (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45 A grounding electrode with electrode, filter, and H2Ohm compound. |
| 1 | S610 | Plastic access box. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 1 | TGBUSG10 | 1000A capacity busbar with insulators (without enclosure). |
Recommended Basic Lightning Protection System for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp. electrode with a bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic inspection box. |
| 1 | ANTIOX | Aerosol for terminal protection. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 2 | TGAC | Tower insulator. |
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approximately 8 meters are used.
See the Physical Ground + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations
- Ensure the installation is performed by a trained professional.
- Schedule a maintenance plan to check guy wire tension and tighten hardware.
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts.
- A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending in orange-red (SYSCOM does not perform tower painting).
- It is recommended to illuminate the tower, at least at the tip, with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
