SYSCOM TOWERS
9 m Floor-Mounted Guyed Tower Kit with STZ30G Hot-Dip Galvanized Section. (Guy wires not included).
9 m Floor-Mounted Guyed Tower Kit with STZ30G Hot-Dip Galvanized Section. (Guy wires not included).
Couldn't load pickup availability
Key Features
- Product manufactured under ISO 9001:2015 standards.
- High elevation / Low cost.
- 100% section-by-section assembly inspection.
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008.
- Ideal for high-humidity coastal zones or industrial areas.
Physical Specifications
- Maximum Axial Load: 200 kg.
- Height: 9 meters (3 sections).
- Wind Resistance: 200 km/h.
- Anti-corrosive protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
- Application: Outdoor (Humid zones).
| Quantity | Model | Description |
|---|---|---|
| 3 | STZ30G | Tower section, 30 cm face width. |
| 1 | SCZ30PG | 30 cm tower top with lightning rod set screw. |
| 1 | SBA30G | Base for 30 cm tower. |
| 1 | SAB30G | Anchor for tower base. |
| 2 | SJB30G | Guy wire mounting flange. |
| 3 | SAP02G | Ground anchor for guy wire. |
| 12 | CUELLO-14-HDG | Thimble for guy wire. |
| 36 | NUDO-316-FJG | 3/16" wire rope clip. |
Does not include guy wire.
75 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters are recommended: SRET-318-CAM
Does not include turnbuckles
6 turnbuckles of 1/2' x 6' are recommended: TEN1/2X6OGJ or TEN1/2X6OQJ.
Note: Failure to use installation accessories such as flanges, tower base, tower anchor, or guy anchors will void the equipment warranty, and any additional modifications are the responsibility of the installer.
Signaling/Lighting System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe light with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light |
*Signaling standards dictate that the tower must be painted in 7 equal-sized bands; 4 bands in orange-red and 3 in white.
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets |
| 1 | S-GULV | Line guide |
| 12 | SRET-338 | 3/8" cable |
| 6 | NUDO-38FJG | 3/8" forged wire rope clip |
| 2 | CUELLO-38-HDG | 3/8" thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety Slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 mandates the use of fall arrest systems when working on a structure.
KLP-TZ09-PRO - All included! Ideal for 9 m towers with dipole, wiring, and electrodes.
You can also quote the following Grounding or Lightning Rod components individually:
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with Electrode, Filter, and H2Ohm compound |
| 1 | S610 | Plastic inspection box. |
| 3 | TGCR11 | Eyelet connector |
| 2 | TGAB18 | Connector for rod |
| 1 | TGBUSG10 | Busbar with 1000A capacity insulators (No cabinet) |
* Use of 4 AWG coated copper cable (SLY-287-GRN) is recommended for grounding the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp electrode. With one bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic inspection box. |
| 1 | ANTIOX | Aerosol for terminal protection. |
| 3 | TGCR11 | Eyelet connector. |
| 2 | TGAB18 | Connector for rod. |
| 2 | TGAC | Tower insulator. |
*The dipole-style tip offers a 72° protection cone below the coil. Recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration: SLY-346-BLK. Considering a maximum electrode installation distance of 3 meters from the tower, approx. 8 meters are used.
See the Earth Ground + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations
- Ensure that the installation is performed by a trained professional.
- Schedule a maintenance plan to check guy wire tension and tighten hardware.
- Do not install solar panels at a height greater than 6 meters. Check the compatibility between solar cells and mounts.
- A stress analysis must be performed when placing an eccentric load on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
- The tower must be painted in aviation orange and white, in 7 bands of equal height, starting and ending with aviation orange (SYSCOM does not perform tower painting).
- It is recommended to light the tower at least at the top with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images


