9 m Ground-Based Guyed Tower Kit with Hot-Dip Galvanized STZ35G Section (Guy wire not included).
- $ 22,399.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-35G-009
Key Features: Product manufactured under ISO 9001:2015 standards High Elevation / Low cost. 100% Section-by-section assembly inspection. Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008 Ideal for high-humidity coastal zones or industrial...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-35G-009 , supplier:Syscom , syscom
Key Features:
- Product manufactured under ISO 9001:2015 standards
- High Elevation / Low cost.
- 100% Section-by-section assembly inspection.
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008
- Ideal for high-humidity coastal zones or industrial areas.
Physical Features:
- Maximum Axial Load: 350 kg.
- Height: 9 meters (3 sections).
- Wind resistance: 200 km/h.
- Anti-corrosion protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
- Application: Outdoor (Humid Zones).
Includes the following components:
| Quantity | Model | Description |
|---|---|---|
| 3 | STZ35G | Tower section with 35 cm face width. |
| 1 | SCZ35PG | 35 cm tower top cap with lightning rod clamp. |
| 1 | SBZ35G | 35 cm tower base. |
| 1 | SAB45G | Tower base anchor 35/45. |
| 1 | SJB35G | Guy wire support flange. |
| 3 | SAZ45G | Floor anchor for guy wire. |
| 6 | CUELLO-14-HDG | Thimble for guy wire |
| 18 | NUDO-316-FJG | 3/16' cable clamp. |
Guy wire not included. 42 meters of 3/16' guy wire is recommended ( SRET-474-CAM or SRET-316-DA) or larger diameters.
Turnbuckles not included. 3 turnbuckles of 5/8' x 9' are recommended ( TEN5/8X9OGJ or TEN5/8X9OQJ).
**Failure to use installation accessories such as flanges, tower base, tower anchor, or guy wire anchors will be considered a voiding of the equipment warranty, and any additional adaptation is the responsibility of the installer.**
Supplementary Accessories (Not included):
Signaling/Lighting System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe type with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light |
*Signaling standards dictate that the tower must be painted in 7 bands of equal size; 4 bands in reddish-orange tone and 3 in white.
Lifeline System (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening hardware |
| 1 | S-GULV | Line guide |
| 12 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged clamp |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 mandates the use of systems that arrest accidental falls on a structure.
Recommended Grounding System for Tower and Mounted Equipment (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound |
| 1 | S610 | Plastic access box. |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | Grounding bus bar with 1000A capacity insulators (No cabinet) |
* The use of 4 AWG jacketed copper cable ( SLY-287-GRN) is recommended for grounding the electrode to the tower. For equipment on the tower, 6 AWG ( SLY-291-GRN) can be used.
Recommended Basic Lightning Rod System for Tower (Not included):
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp electrode. With one bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic inspection box. |
| 1 | ANTIOX | Terminal protection spray. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 6 | TGAC114 | Tower insulator. |
*The dipole-type tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
See the physical ground + lightning rod connection diagram in the following DIAGRAM.
Recommendations:
- Ensure that the installation is performed by a trained professional.
- Schedule a maintenance plan for checking guy wire tension and adjusting hardware.
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts.
- A stress study must be performed when placing an eccentric load on the tower. This can cause excessive twisting and bending in the tower, leading to structural failure.
- The tower must be painted in an orange-red and white tone, in 7 stripes of equal height, starting and ending in orange-red (SYSCOM does not perform tower painting).
- It is recommended to light the tower, at least at the tip, with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
