12m Roof Guyed Tower Kit with STZ30 Electro-Galvanized Section (Guy wire not included).
- $ 14,599.00
- Brand: SYSCOM TOWERS
- Availability: 2 In stock
- SKU: KTZ-30E-012P
Key Features Product manufactured under ISO 9001:2015 standards. High elevation / Low cost. 100% inspection of section-by-section assembly. Electrolytic galvanization in accordance with ASTM B-633 standards. Ideal for dry areas...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-30E-012P , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards.
- High elevation / Low cost.
- 100% inspection of section-by-section assembly.
- Electrolytic galvanization in accordance with ASTM B-633 standards.
- Ideal for dry areas free of corrosion.
Physical Characteristics
- Maximum Axial Load: 200 kg.
- Height: 12 meters (4 sections).
- Wind Resistance: 200 km/h.
- Anti-corrosion protection: Electrolytic Galvanization (ASTM B-633).
- Application: Outdoor (Desert or low-humidity zones).
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 4 | STZ30 | 30 cm face width tower section. |
| 1 | SCZ30P | 30 cm tower cap with set screw for lightning rod. |
| 1 | SBA30 | 30 cm tower base. |
| 1 | SAB30 | Tower base anchor. |
| 2 | SJB30 | Guy wire support flange. |
| 3 | SAP01 | Wall anchor for guy wire. |
| 12 | CUELLO-14-HDG | Thimble for guy wire. |
| 36 | NUDO-316-FJG | 3/16' wire rope clip. |
Does not include guy wire. 100 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters are recommended.
Does not include turnbuckles. 6 turnbuckles of 1/2' x 6' are recommended. (TEN1/2X6OGJ or TEN1/2X6OQJ).
Warning:
Failure to use installation accessories such as flanges, tower base, tower anchor, or guy wire anchors will result in the loss of the equipment warranty, and any additional modifications are the responsibility of the installer.
Complementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Self-contained LED strobe with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light. |
* The signaling standard dictates that the tower must be painted in 7 bands of equal size; 4 bands in reddish-orange and 3 in white.
Lifeline system (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets. |
| 1 | S-GULV | Line guide. |
| 15 | SRET-338 | 3/8' cable. |
| 6 | NUDO-38FJG | 3/8' forged cable clip. |
| 2 | CUELLO-38-HDG | 3/8' thimble. |
| 1 | TRY-ACC-SLIDER | (Optional) Safety carriage for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
* NOM-009 makes it mandatory to use systems that stop accidental falls on a structure.
New! Lightning rod + Grounding kit with cable (Not included)
KLP-TZ12-PRO - All-inclusive! Ideal for 12m towers with corona dipole, wiring, and electrodes.
Or you can quote the following Grounding or Lightning rod components individually:
Grounding System Recommended for Tower and Mounted Equipment (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45A grounding electrode with electrode, filter, and H2Ohm compound. |
| 1 | S610 | Plastic access box. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 1 | TGBUSG10 | Grounding bus bar with 1000A capacity insulators (no cabinet). |
* It is recommended to use insulated copper cable 4 AWG (SLY-287-GRN) to ground the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Basic Lightning Rod System Recommended for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2). |
| 1 | TG45AB | 45 Amp electrode with a bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic inspection box. |
| 1 | ANTIOX | Aerosol for terminal protection. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 8 | TGAC | Tower insulator. |
*The dipole-type tip offers a 72° cone of protection below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approximately 8 meters are used.
See the Physical Ground + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations
- Ensure the installation is performed by a trained professional.
- Schedule a maintenance plan to check guy wire tension and tighten hardware.
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts.
- A stress study must be performed when placing an eccentric load on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
- The tower must be painted in reddish-orange and white, in 7 stripes of equal height, starting and ending with reddish-orange (SYSCOM does not perform tower painting).
- It is recommended to illuminate the tower, at least at the tip, with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
