SYSCOM TOWERS
15m Roof-Mounted Guyed Tower Kit with Electro-Galvanized STZ30 Section (Guy wire not included).
15m Roof-Mounted Guyed Tower Kit with Electro-Galvanized STZ30 Section (Guy wire not included).
Couldn't load pickup availability
Key Features
- Product manufactured under ISO 9001:2015 standards.
- High elevation / Low cost.
- 100% section-by-section assembly inspection.
- Electrolytic galvanization according to ASTM B-633 standard.
- Ideal for dry, corrosion-free zones.
Physical Characteristics
- Maximum Axial Load: 200 kg.
- Height: 15 meters (5 sections).
- Wind resistance: 200 km/h.
- Anti-corrosive protection: Electrolytic Galvanization (ASTM B-633).
- Application: Outdoor (desert or low-humidity areas).
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 5 | STZ30 | Tower section with 30 cm face width. |
| 1 | SCZ30P | 30 cm tower top with lightning rod set screw. |
| 1 | SBA30 | 30 cm tower base. |
| 1 | SAB30 | Tower base anchor. |
| 3 | SJB30 | Guy wire attachment flange. |
| 3 | SAP01 | Slab or wall anchor for guy wire. |
| 18 | CUELLO-14-HDG | Thimble for guy wire. |
| 54 | NUDO-316-FJG | 3/16' cable clamp. |
Guy wire not included. 160 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters are recommended.
Turnbuckles not included. 9 turnbuckles of 1/2' x 6' are recommended (TEN1/2X6OGJ or TEN1/2X6OQJ).
**NOT using installation accessories such as flanges, tower base, tower anchor, or guy wire anchors will be considered a voidance of the equipment warranty, and any additional adaptation remains the responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction lamp. |
*Signaling standards dictate that the tower must be painted in 7 bands of equal size; 4 reddish-orange bands and 3 white bands.
Lifeline system (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening brackets. |
| 1 | S-GULV | Line guide. |
| 18 | SRET-338CAM | 3/8' cable. |
| 6 | NUDO-38FJG | 3/8' forged clamp. |
| 2 | CUELLO-38-HDG | 3/8' thimble. |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 mandates the use of systems that break accidental falls on a structure.
New! Lightning rod + Grounding kit with cable (Not included)
KLP-TZ15-PRO - All-inclusive! Ideal for 15 m towers with crown dipole, wiring, and electrodes.
Alternatively, you can quote the following Grounding or Lightning rod components individually:
Grounding System Recommended for Tower and equipment mounted on it (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45 A grounding electrode with Electrode, Filter, and H2Ohm compound. |
| 1 | S610 | Plastic junction box. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
| 1 | TGBUSG10 | Grounding bus bar with insulators, 1000A capacity (without cabinet). |
* 4 AWG coated copper cable (SLY-287-GRN) is recommended for connecting the electrode to the tower. For equipment on the tower, 6 AWG cable (SLY-291-GRN) can be used.
Basic Lightning Rod System Recommended for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning rod tip with aluminum mast (MASTIL1.2). |
| 1 | TG45AB | 45 Amp electrode. With a bag of impedance-improving compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic junction box. |
| 1 | ANTIOX | Terminal protection spray. |
| 3 | TGCR11 | Eye connector. |
| 2 | TGAB18 | Rod connector. |
The dipole-type tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering the electrode is installed at a maximum of 3 meters from the tower, approximately 8 meters are used.
See Grounding + Lightning Rod connection diagram: DIAGRAM
Recommendations
- Ensure that the installation is performed by a trained professional.
- Schedule a maintenance plan to check guy wire tension and tighten hardware.
- Do not install solar panels at a height greater than 6 meters. Check the compatibility between solar cells and mounts.
- A stress analysis must be performed when placing an eccentric load on the tower. This can cause excessive twisting and bending in the tower, leading to structural failures.
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending in orange-red (SYSCOM does not perform tower painting).
- It is recommended to illuminate the tower at least at the top with a red lamp.
Representative Diagram: Guy Installation Version 2.0
Installation Images


