18 m Roof Guyed Tower Kit with Galvanized STZ30 Section (Guy wire not included).
- $ 20,199.00
- Brand: SYSCOM TOWERS
- Availability: 1 In stock
- SKU: KTZ-30E-018P
Key Features Product manufactured under ISO 9001:2015 standards. High elevation / Low cost. 100% section-by-section assembly inspection. Electrolytic galvanization according to ASTM B-633 standards. Ideal for dry, corrosion-free areas. Physical...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-30E-018P , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards.
- High elevation / Low cost.
- 100% section-by-section assembly inspection.
- Electrolytic galvanization according to ASTM B-633 standards.
- Ideal for dry, corrosion-free areas.
Physical Characteristics
- Maximum Axial Load: 200 kg.
- Height: 18 meters (6 sections).
- Wind Resistance: 200 km/h.
- Anti-corrosive protection: Electrolytic Galvanized (ASTM B-633).
- Application: Outdoor (desert or low-humidity zones).
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 6 | STZ30 | Tower section with 30 cm face width. |
| 1 | SCZ30P | 30 cm tower top with set screw for lightning rod. |
| 1 | SBA30 | Base for 30 cm tower. |
| 1 | SAB30 | Tower base anchor. |
| 3 | SJB30 | Guy wire clamp. |
| 3 | SAP01 | Slab or wall anchor for guy wire. |
| 18 | CUELLO-14-HDG | Thimble for guy wire |
| 54 | NUDO-316-FJG | 3/16' cable clip (wire rope clamp) |
Guy wire not included.
We recommend 190 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters.
Turnbuckles not included
We recommend 9 1/2' x 6' turnbuckles. (TEN1/2X6OGJ or TEN1/2X6OQJ).
**NOT using installation accessories such as clamps, tower base, tower anchor, or guy wire anchors will be considered a voiding of the equipment warranty, and any additional modifications are the sole responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light |
*Signaling regulations dictate that the tower must be painted in 7 equally sized stripes; 4 orange-red stripes and 3 white stripes.
Lifeline system (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening brackets |
| 1 | S-GULV | Line guide |
| 20 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged wire rope clip |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 mandates the use of systems to arrest accidental falls on a structure.
New! Lightning rod kit + Grounding system with cable. Brand: LINKEDPRO (Not included)
KLP-TZ18-PRO. - All-inclusive! Ideal for 18m towers with corona dipole, wiring, and electrodes.
Or you can quote the following Grounding or Lightning rod components individually:
Recommended Grounding System for Tower and Mounted Equipment (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45 A grounding electrode with electrode, filter, and H2Ohm compound. |
| 1 | S610 | Plastic access box. |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | 1000A capacity ground bus bar with insulators (no cabinet) |
* We recommend using 4 AWG jacketed copper wire (SLY-287-GRN) to ground the electrode to the tower. For tower-mounted equipment, 6 AWG (SLY-291-GRN) can be used.
*The dipole-type tip offers a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper wire is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
View Physical Ground + Lightning Rod connection diagram.
Recommendations
- Ensure the installation is performed by a trained professional.
- Schedule a maintenance plan to check guy wire tension and tighten hardware.
- Do not install solar panels at a height greater than 6 meters. Verify compatibility between solar cells and mounts.
- A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
- The tower must be painted in an orange-red and white tone, in 7 stripes of equal height starting and ending with orange-red (SYSCOM does not perform the tower painting work).
- It is recommended to illuminate the tower at least at the top with a red light.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
