SYSCOM TOWERS
21 m Roof Guyed Tower Kit with Hot-Dip Galvanized STZ30G Section (Guy wire not included).
21 m Roof Guyed Tower Kit with Hot-Dip Galvanized STZ30G Section (Guy wire not included).
Couldn't load pickup availability

Key Features
- Product manufactured under ISO 9001:2015 standards.
- High elevation / Low cost.
- 100% section-by-section assembly inspection.
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008.
- Ideal for high-humidity coastal areas or industrial sites.
Physical Characteristics
- Maximum Axial Load: 200 kg.
- Height: 21 meters (7 sections).
- Wind Resistance: 200 km/h.
- Anti-corrosion protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
- Application: Outdoor (Humid zones).
Includes the following components
- 7 units - STZ30G: 30 cm face width tower section.
- 1 unit - SCZ30PG: 30 cm tower top with lightning rod set screw.
- 1 unit - SBA30G: 30 cm tower base.
- 1 unit - SAB30G: Tower base anchor.
- 4 units - SJB30G: Guy wire attachment flange.
- 3 units - SAP01G: Slab or wall anchor for guy wire.
- 24 units - CUELLO-14-HDG: Guy wire thimble.
- 72 units - NUDO-316-FJG: 3/16' cable clamp.
Guy wire not included. 290 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters are recommended.
Turnbuckles not included. 12 1/2' x 6' turnbuckles are recommended (TEN1/2X6OGJ or TEN1/2X6OQJ).
**Failure to use installation accessories such as flanges, tower base, tower anchor, or guy wire anchors will be considered a voiding of the equipment warranty, and any additional adaptation is the responsibility of the installer.**
Complementary Accessories (Not included)
Signaling/Lighting System (Not included)
*Signaling standards dictate that the tower must be painted in 7 equal-sized bands; 4 bands in reddish-orange and 3 in white.
Lifeline system (Not included)
- 1 unit - SHE-LV: Pair of mounting brackets.
- 1 unit - S-GULV: Line guide.
- 24 units - SRET-338CAM: 3/8' cable.
- NUDO-38FJG: 3/8' forged cable clamp.
- 2 units - CUELLO-38-HDG: 3/8' thimble.
- 1 unit - TRY-ACC-SLIDER: (Optional) Safety carriage for installer.
- 1 unit - SYS-USA7B: (Optional) Suspension harness.
*NOM-009 mandates the use of systems that stop accidental falls on a structure.
New! Lightning Rod Kit + Grounding with Cable (Not included)
KLP-TZ21-PRO - All-inclusive! Ideal for 21m towers with corona dipole, wiring, and electrodes.
You can also quote the following Grounding or Lightning Rod components individually:
Recommended Grounding System for Tower and Mounted Equipment (Not included)
* 4 AWG coated copper cable (SLY-287-GRN) is recommended for connecting the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Recommended Basic Lightning Protection System for Tower (Not included)
- 1 unit - TGTDPC: Corona dipole lightning rod tip.
- 1 unit - TG45AB: 45 Amp electrode. With one bag of improving compound (H2OHM), compass, and level.
- 1 unit - S610: Small plastic access box.
- 1 unit - ANTIOX: Terminal protection spray.
- TGCR11: Eye connector.
- 2 units - TGAB18: Rod connector.
- 14 units - TGAC: Down conductor insulator.
*The dipole tip offers a 72° protection cone below the coil. Recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering the electrode is installed at a maximum of 3 meters from the tower, approx. 8 meters are used.
See the Grounding + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations
- Ensure installation is carried out by a trained professional.
- Schedule a maintenance plan for checking guy wire tension and adjusting hardware.
- Do not install solar panels higher than 6 meters. Check compatibility between solar cells and mounts.
- A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending, leading to structural failure.
- The tower must be painted in reddish-orange and white, in 7 bands of equal height, starting and ending with reddish-orange (SYSCOM does not perform tower painting).
- It is recommended to light the tower at least at the top with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images


