27m Roof-Mounted Guyed Tower Kit with STZ30G Hot-Dip Galvanized Section (guy wire not included).
- $ 35,499.00
- Brand: SYSCOM TOWERS
- Availability: In stock
- SKU: KTZ-30G-027P
Key Features Product manufactured under ISO 9001:2015 standards. High Elevation / Low cost. 100% Section-by-section assembly inspection. Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008. Ideal for coastal areas with high humidity...
Tags: categoria:Redes e IT , marca:SYSCOM TOWERS , proveedor:Syscom , Redes Y Conectividad , sku:KTZ-30G-027P , supplier:Syscom , syscom
Key Features
- Product manufactured under ISO 9001:2015 standards.
- High Elevation / Low cost.
- 100% Section-by-section assembly inspection.
- Hot-dip galvanized in accordance with NMX-H-004-SCFI-2008.
- Ideal for coastal areas with high humidity or industrial zones.
Physical Characteristics
- Maximum Axial Load: 200 kg.
- Height: 27 meters (9 sections).
- Wind resistance: 200 km/hr.
- Anti-corrosive protection: Hot-dip galvanized (NMX-H-004-SCFI-2008).
- Application: Outdoor (Humid zones).
Includes the following components
| Quantity | Model | Description |
|---|---|---|
| 9 | STZ30G | 30 cm face width tower section. |
| 1 | SCZ30PG | 30 cm tower top with lightning rod set screw. |
| 1 | SBA30G | 30 cm tower base. |
| 1 | SAB30G | Tower base anchor. |
| 5 | SJB30G | Guy wire bracket. |
| 3 | SAP01G | Slab or wall anchor for guy wire. |
| 30 | CUELLO-14-HDG | Thimble for guy wire |
| 90 | NUDO-316-FJG | 3/16' cable clamp. |
Does not include guy wire. We recommend 430 meters of 1/8' guy wire (SRET-318-CAM) or larger diameters.
Does not include Turnbuckles. We recommend 15 turnbuckles of 1/2' x 6' (TEN1/2X6OGJ or TEN1/2X6OQJ).
**Failure to use installation accessories such as Brackets, Tower Base, Tower Anchor, or Guy Wire Anchors is considered a voiding of the equipment warranty, and any additional adaptation is the responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED beacon with photocell, solar panel, and battery. Type L810. |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light |
*Signaling standards dictate that the tower must be painted in 7 bands of equal size; 4 bands in reddish-orange and 3 in white.
Lifeline System (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of fastening brackets |
| 1 | S-GULV | Line guide |
| 30 | SRET-338CAM | 3/8' cable |
| 6 | NUDO-38FJG | 3/8' forged wire rope clip |
| 2 | CUELLO-38-HDG | 3/8' thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer. |
| 1 | SYS-USA7B | (Optional) Suspension harness. |
*NOM-009 makes the use of systems to arrest accidental falls on a structure mandatory.
New! Lightning Rod Kit + Grounding with cable. LINKEDPRO brand (Not included)
KLP-TZ27-PRO. - All included! Ideal for 27 m towers with crown dipole, wiring, and electrodes.
Or you can also quote the following grounding or lightning rod components individually:
Recommended Grounding System for Tower and mounted equipment (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TG45AB | 45 A grounding electrode with Electrode, Filter, and H2Ohm compound |
| 1 | S610 | Plastic handhole. |
| 3 | TGCR11 | Eye connector |
| 2 | TGAB18 | Rod connector |
| 1 | TGBUSG10 | Grounding bus bar with insulators, 1000A capacity (No enclosure) |
* We recommend using 4 AWG coated copper cable (SLY-287-GRN) to ground the electrode to the tower. For equipment on the tower, 6 AWG (SLY-291-GRN) can be used.
Basic Lightning Rod System Recommended for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Crown dipole lightning rod tip |
| 1 | TG45AB | 45 Amp electrode. With one bag of enhancing compound (H2OHM), compass, and level. |
| 1 | S610 | Small plastic handhole. |
*The dipole-type tip provides a 72° protection cone below the coil. It is recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
See the Physical Ground + Lightning Rod connection diagram in the following DIAGRAM.
Recommendations
- Ensure that the installation is performed by a trained professional.
- Schedule a maintenance plan for checking guy wire tension and adjusting hardware.
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts.
- A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure.
- The tower must be painted in orange-red and white, in 7 stripes of equal height starting and ending with orange-red (SYSCOM does not perform tower painting).
- It is recommended to illuminate the tower at least at the tip with a red lamp.
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images
