1
/
of
1
SYSCOM TOWERS
30 m Roof-Mounted Guyed Tower Kit with Electro-Galvanized STZ30 Section (Guy wire not included).
30 m Roof-Mounted Guyed Tower Kit with Electro-Galvanized STZ30 Section (Guy wire not included).
Regular price
$ 31,299.00
Regular price
Sale price
$ 31,299.00
Taxes included.
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
Vendido por Glaretum, Proveedor de Servicio Autorizado Apple
Paga con tarjeta, Apple Pay o PayPal
¿Dudas? Escríbenos por WhatsApp o llama al 800 461 0096
Key Features
- Product manufactured under ISO 9001:2015 standards
- High elevation / Low cost
- 100% Inspection of section-by-section assembly
- Electrolytic galvanization according to ASTM B-633 standards
- Ideal for dry, corrosion-free areas
Physical Characteristics
- Maximum Axial Load: 200 kg
- Height: 30 meters (10 sections)
- Wind Resistance: 200 km/hr
- Anti-corrosion protection: Electrolytic Galvanization (ASTM B-633)
- Application: Outdoor (Desert or low-humidity areas)
Includes the following components:
| Quantity | Model | Description |
|---|---|---|
| 10 | STZ30 | Tower section, 30 cm face width |
| 1 | SCZ30P | 30 cm tower top cap with lightning rod set screw |
| 1 | SBA30 | Base for 30 cm tower |
| 1 | SAB30 | Tower base anchor |
| 5 | SJB30 | Guy wire clamp flange |
| 3 | SAP01 | Slab or wall anchor for guy wire |
| 30 | CUELLO-14-HDG | Thimble for guy wire |
| 90 | NUDO-316-FJG | 3/16" wire rope clip |
Guy wire not included. We recommend 480 meters of 1/8" guy wire SRET-318-CAM or larger diameters.
Turnbuckles not included. We recommend 15 turnbuckles of 1/2' x 6'. (TEN1/2X6OGJ or TEN1/2X6OQJ).
**Failure to use installation accessories such as flanges, tower base, tower anchor, or guy anchors is considered a voiding of the equipment warranty, and any additional modifications are the sole responsibility of the installer.**
Complementary accessories (Not included)
Signaling/Lighting System (Not included)
Signaling/Lighting System
| Quantity | Model | Description |
|---|---|---|
| 2 | EIGSLSE | Autonomous LED strobe with photocell, solar panel, and battery. Type L810 |
| 2 | HLU3R2 | Mount for EIGSLSE obstruction light |
*Signaling standards dictate that the tower must be painted in 7 equal-sized bands; 4 bands in reddish-orange and 3 in white.
Lifeline System (Not included)
Lifeline System
| Quantity | Model | Description |
|---|---|---|
| 1 | SHE-LV | Pair of mounting brackets |
| 1 | S-GULV | Line guide |
| 33 | SRET-338CAM | 3/8" cable |
| 6 | NUDO-38FJG | 3/8" forged rope clip |
| 2 | CUELLO-38-HDG | 3/8" thimble |
| 1 | TRY-ACC-SLIDER | (Optional) Safety slider for installer |
| 1 | SYS-USA7B | (Optional) Suspension harness |
*NOM-009 mandates the use of fall protection systems on structures.
New! Lightning Rod Kit + Grounding with Cable. Brand: LINKEDPRO (Not included)
KLP-TZ30-PRO - All-inclusive! Ideal for 30m towers with crown dipole, wiring, and electrodes.
Alternatively, you can quote the following grounding or lightning rod components individually:
* The use of 4 AWG coated copper cable (SLY-287-GRN) is recommended for grounding from the electrode to the tower. For equipment on the tower, 6 AWG cable may be used (SLY-291-GRN).
Recommended Basic Lightning Protection System for Tower (Not included)
| Quantity | Model | Description |
|---|---|---|
| 1 | TGTDPC | Lightning Rod with Aluminum Mast (MASTIL1.2) |
| 1 | TG45AB | 45 Amp Electrode. Includes one bag of impedance improving compound (H2OHM), compass, and level |
| 1 | S610 | Small plastic inspection well |
| 1 | ANTIOX | Terminal protection spray |
| 3 | TGCR11 | Eye Connector |
| 2 | TGAB18 | Rod Connector |
| 20 | TGAC | Tower insulator |
*The dipole type tip offers a 72° protection cone below the coil. Recommended for areas with low lightning incidence.
*2/0 gauge copper cable is recommended for the integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
*2/0 gauge copper cable is recommended for the integration (SLY-346-BLK). Considering an electrode installation at a maximum of 3 meters from the tower, approx. 8 meters are used.
Recommendations:
- Ensure that the installation is carried out by a trained professional
- Schedule a maintenance plan to check guy wire tension and tighten hardware
- Do not install solar panels at a height greater than 6 meters. Check compatibility between solar cells and mounts
- A stress study must be performed when an eccentric load is placed on the tower. This can cause excessive torsion and bending in the tower, leading to structural failure
- The tower must be painted in orange-red and white, in 7 stripes of equal height, starting and ending with orange-red (SYSCOM does not perform tower painting work)
- It is recommended to illuminate the tower, at least at the top, with a red lamp
Representative Diagram: Guy Wire Installation Version 2.0
Installation Images


