Wishlist

4G Vehicle Tracker with Emergency Button and Relay Included / Door Open Detection / Multiple Digital Outputs / Compatible with Ultrasonic Fuel Sensor

  • $ 1,599.00
  • Brand: JIMIIOT
  • Availability: In stock
  • SKU: VL802

Concox / Jimi IoT  ·  LTE Vehicle Terminal VL802 — 4G GPS Tracker with Two-Way Communication A direct upgrade to the legendary GT06N. Designed for industrial and commercial fleets —...

Tags: categoria:GPS , marca:JIMIIOT , proveedor:Syscom , sku:VL802 , supplier:Syscom , syscom , Telemática y Equipamiento Vehicular

Concox / Jimi IoT  ·  LTE Vehicle Terminal
VL802 — 4G GPS Tracker with Two-Way Communication

A direct upgrade to the legendary GT06N. Designed for industrial and commercial fleets — cars, trucks, and buses. LTE CAT1 with GSM (2G) fallback, microphone and speaker for two-way calling, engine cutoff via relay, panic button, and Bluetooth configuration from a mobile phone.

LTE CAT1
GSM 2G fallback
< 2.5 m
CEP Accuracy
9–36 V
Car, truck, and bus
IP65
-20°C to +70°C
RS485
+ 2 configurable I/O
Concox Help Page
Manuals, commands, and technical support →
Get certified on Concox devices
Syscom ExpertGPS Course →

Includes in the box

Panic button
Discreet SOS for the cabin
Relay
For engine/fuel cutoff
Power cable
Harness with ACC, SOS, and outputs

What the VL802 does

Two-way calling
Integrated microphone and speaker: talk to the operator without using a phone.
Remote listening
Discreet microphone to monitor the environment inside the vehicle.
Remote engine stop
Immobilize the unit by cutting off power or the fuel pump with the included relay.
SOS Button
Emergency call and immediate alert to the dispatch center.
Ignition detection
Real-time ACC status for usage reports, idling, and engine hours.
Bluetooth configuration
App for iOS and Android: configure in the field without a PC or cables.

Programmable alerts

Received via SMS, notification in the tracking platform app, or call, depending on the device programming.

Vibration Movement Panic / SOS Sharp turn Harsh acceleration Door open Speeding Vehicle ignition Low battery Power cut Geofence entry / exit Driver fatigue

Installation video

Official Jimi IoT tutorial: VL802 installation (combo with JC170 dashcam).

Before installing: the SIM
  • Requires MICRO-sized data SIM.
  • The SIM30M2M and MICSIM30M2M SIMs are not compatible and are not recommended.
  • With the recommended configuration, 20–25 MB per month is usually sufficient.

Technical specifications

Positioning
System GPS + BDS + Wi-Fi (L1 band)
Accuracy < 2.5 m CEP
Sensitivity Tracking -162 dBm / Acquisition -160 dBm
TTFF (open sky) Hot start ≤ 1 s / Cold start ≤ 32 s
Communication
Network LTE CAT1 with GSM (2G) fallback
Frequencies LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28
GSM: 850/900/1800/1900 MHz
Bluetooth Yes (app configuration)
Interfaces and I/O
Digital inputs ACC (ignition) and SOS
Digital outputs 1 relay (engine/fuel cutoff)
Configurable I/O 2 special ports as extra digital input or output
Data port RS485 for peripherals (sensors, reader, etc.)
Analog input 1
Audio Integrated microphone and speaker
LED indicators GNSS (green), cellular network (blue), power (red)
Memory 16 + 16 MB (black box)
Sensor Accelerometer
Electrical and physical
Input voltage 9 – 36 VDC
Battery Industrial-grade Li-Polymer 450 mAh / 3.7 V
Dimensions 105 x 56 x 22 mm
Weight 120 g
Operating temperature -20 °C to +70 °C
Protection rating IP65
SIM Micro data SIM

Manufacturer specifications, subject to change without prior notice.

Recommended reporting configuration
Engine on
1 minute
Engine off
20 minutes
Turn report
25° – 30°
Distance-based report
Disabled

With these values, a 20 or 25 MB data package is sufficient for one month; actual consumption depends on the time the unit is in motion. This table is informative and serves as a recommendation, not a rule.

Download resources

Official technical sheet
iconcox.com →
Datasheet PDF
Jimi IoT →
User manual (Spanish)
Wiring, relay, and installation →
Parameters for Wialon
Compatibility and configuration →

Recently viewed