16 A, 120 V adaptive phase power module, for extending GRAFIK Eye QS and 3000 zones, LP, LCP, and GP dimming panels, and HomeWorks, white finish

Lutron phase-adaptive power module that expands the load capacity of a dimming zone up to 16 A at 120 V. It is controlled by 120 V Lutron equipment such as GRAFIK Eye QS and GRAFIK Eye 3000 units, LP, LCP, and GP dimming panels, and HomeWorks remote panels, making it the right piece when a zone needs to handle more load than the control can support on its own (up to three modules per zone are supported). It dims incandescent, halogen, magnetic and electronic low-voltage transformers, Lutron Tu-Wire fluorescent ballasts, and neon/cold cathode. It is installed indoors, in a 2-gang wall box or 4x4 box, with status and diagnostic LEDs that facilitate commissioning and support.

Key Features

• Expands the capacity of a dimming zone to 16 A; up to 3 modules can be used per zone
• Compatible only with 120 V versions of GRAFIK Eye QS and 3000, LP, LCP, GP panels, and HomeWorks
• Dims incandescent, halogen, magnetic and electronic low-voltage, Tu-Wire, and neon/cold cathode
• Automatic shutdown on overload; green (status) and red (diagnostic) LEDs with codes
• Mounts in a 2-gang 89 mm box or a 53 mm deep 4x4 box; indoor use only
• Install with arrows pointing up and 114 mm of clearance above and below for ventilation
• Wire with at least 12 AWG (2.5 mm2) copper conductor

Technical Specifications