LEAPTON 620 Watt Monocrystalline Solar Module
-
Model: LP182*199-M-72-Nb620W
-
NOTE: 30 mm frame
Key Features
- Lower internal resistance current
- N-TYPE cell
- Improved functionality in low-light conditions
- Strict salt mist and ammonia corrosion testing by TUV Nord
- Higher performance in low-light environments
- Lower probability of attenuation caused by PID; the phenomenon is minimized
Certifications
The LEAPTON solar module is suitable for any project.
It holds the following certifications:
- IEC 61215-2: 2016
- CE
- JPEC
The solar module is manufactured at Leapton, which is ISO 9001 certified, ensuring compliance with good quality management systems.
Currently, this solar module is a favorite in the EUROPEAN market.
STC Electrical Data*
-
Maximum Power Output (Pmax): 620 W
-
Power Tolerance: 0~+5 W
-
Module Efficiency: 22.95%
-
Voltage at Maximum Power (Vmp): 41.06 V
-
Current at Maximum Power (Imp): 15.1 A
-
Open-Circuit Voltage (Voc): 49.55 V
-
Short-Circuit Current: 15.93 A
Mechanical Characteristics
-
Cell Type: Monocrystalline (182x210 mm)
-
Number of cells: 132
-
Dimensions: 2382x1134x30mm
-
Frame: Anodized aluminum alloy
-
Junction box: IP68
-
Cable: 4.0 mm² N 300 mm / P 300 mm
-
Connector: MC4 compatible
Applications
- For grid-tie connection
- Off-grid systems with MPPT controllers
Warranty
- 25-year quality warranty
- 30-year power warranty (80% power output)
Any claim for this product must be made within the warranty period with the corresponding invoice.
The equipment's serial number must be visible, as well as the rear label.
If the module's MC-4 connectors are cut, the warranty is instantly voided.
Do not install in areas where an object may cast a shadow at any point during the day; this is considered improper installation and may be grounds for loss of warranty.
Do not mix modules of different power ratings on the same controller or inverter; this is considered improper installation and may be grounds for loss of warranty.
It is recommended to use the EP-MC4 crimping tool when attaching the PROSECA-01 connectors to the cable that will connect your module to the inverter or controller.
