Strobe LED Lamp Siren / 2-Wire / Wall Mount / 24 Vdc / Selectable Strobe Configuration / English Text / White Color

Description

System Sensor L-Series 2-wire horn strobes are packed with features that increase application versatility, simplify installation, and maximize profits with lower current draw and a modern aesthetic. LED lighting technology provides significantly lower current draw compared to older xenon bulbs across the entire candela range. This improves design flexibility for Notification Appliance Circuits (NACs) while reducing power supply requirements, allowing for simpler and more cost-effective installations.

All devices feature plug-in designs with minimal back-box intrusion, which facilitates quick and error-proof installations, virtually eliminating costly and time-consuming faults. To further simplify installation and protect devices from damage during construction, the L-Series uses a universal mounting plate for all models with an onboard shorting spring, allowing installers to test wiring continuity before installing the device. Installers can also easily adapt devices to meet a wide range of application requirements using field-selectable candela settings, automatic 24 VDC operation selection, and a rotary switch for horn tones with two volume options.

In addition, the System Sensor L-Series with LED notification appliances offers a new diagnostic test point feature that allows device voltage to be measured with a digital voltage meter (DVM) without removing the appliance from the wall or ceiling. The DVM test points are discreetly located on the face of the notification appliance, enabling faster troubleshooting and end-of-line (EOL) voltage checks while greatly reducing the risk of device misplacement or damage during troubleshooting.

Features and Benefits:

• LED technology provides lower current draw.
• Diagnostic test points for digital voltage meter (DVM) on horn strobes.
• Common aesthetic across the L-Series platform.
• Standard and compact sizes.
• Tamper-resistant construction.
• 24-volt operation at 15 and 30 candela.
• Field-selectable candela settings on wall units: 15, 30, 75, 95, 110, 135, and 185.
• Horn rated at 88+ dBA at 16 volts.
• Rotary switches for candela, tone, and volume selections.
• Mounting plate provides plug-in design for easy installation and shorting springs to verify wiring continuity.
• Electrically compatible with legacy SpectrAlert, SpectrAlert Advance, and L-Series devices.
• Synchronization through the use of UL-listed power supplies that support the System Sensor sync protocol or the System Sensor MDL3 Sync Module.
• Available in red and white with FUEGO, Plain, FIRE, and bilingual markings.
• Available in standard and compact models.