ATEN Control System - Gen. 2 Control Box
- $ 51,299.00
- Brand: ATEN
- Availability: 5 In stock
- SKU: VK2200
Gen.2 Compact Control Box with Dual LAN Second-generation control box with a quad-core processor and 2 GB of memory. It offers exceptional performance, real-time response, and fast status updates. Furthermore,...
Gen.2 Compact Control Box with Dual LAN
Second-generation control box with a quad-core processor and 2 GB of memory. It offers exceptional performance, real-time response, and fast status updates. Furthermore, it allows for processing complex, high-load events with custom GUI designs. This device features multi-user access control to securely manage devices on a separate network. It has isolated dual LAN ports for greater security and stability. Additionally, it can be connected to the ATEN Unizon centralized platform, which facilitates the daily management of AV/IT systems. The VK2200 integrates easily into any room setup, whether with ATEN ProAV products or other hardware and software devices. It is especially suitable for environments with high security and performance requirements, such as government agencies, military facilities, corporate organizations, and healthcare institutions. It is part of the ATEN Control System series, which is based on standard Ethernet management. It allows for the control of hardware and software devices in rooms, such as boardrooms and conference rooms, through a customizable graphical user interface accessible from mobile devices and ATEN touch panels.
Features
Memory
- SDRAM: 2GB
- Flash: 8 GB
Interfaces
Serial
- 2x programmable bidirectional RS-232/422/485 ports (2 x 5-pole terminal block connectors, configurable via pin assignments)
- Baud rate: 300 to 115200 (default: 9600)
- Data bits: 8 (default) or 7
- Stop bit: 1 (default) or 2
- Parity: None (default), Even or Odd
- Flow control: None (default) or RTS/CTS
- 6x bidirectional RS-232 port (6 x 3-pole terminal block connectors)
IR/Serial
- 8 x programmable IR / unidirectional RS-232 port (4 x 4-pole terminal block connectors)
- IR: TTL level (0 to 5 V)
- Carrier frequency: 10 KHz ~ 455 KHz
- Serial: Unidirectional RS-232 (0 to 5 V)
- Baud rate: 300 to 115200 (default: 9600)
- Data bits: 8 (default) or 7
- Stop bit: 1 (default) or 2
- Parity: None (default), Even or Odd
Relay
- 4 relay channels (2 x 4-pole terminal block connectors)
- Normally open, isolated relays
- Contact rating: max. 24 VDC, 2 A
I/O
- 2 x programmable digital input/output channels (1 x 3-pole terminal block connector)
- Digital output: 300 mA sink from 24 VDC
- Digital input:
- VCC mode:
- Input voltage range: 0 to 24 VDC
- Programmable range: 1 to 24 VDC
- Dry contact mode:
- Pull-up 2k ohms at + 12 VDC
Ethernet
- 2 x RJ-45 female, 10/100/1000Base-T
- Supported protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
- LAN control:
- Supports DHCP server
- DHCP mode: The following default IP settings will be used if no IP is assigned within 30 seconds:
- IP address: 192.168.0.60
- Subnet mask: 255.255.255.0
- LAN:
- DHCP mode: The following default IP settings will be used if no IP is assigned within 30 seconds:
- IP address: 192.168.0.60
- Subnet mask: 255.255.255.0
VCC
- 1x 12 VDC output port (1 x 2-pole terminal block connector)
- Power supply: 12 VDC, 1 A max.
USB
- 1 USB type A
Panel Specifications
- Size: 1.6"
- Resolution: 128x64
Power
- Internal power: 100-240 VAC, 50-60 Hz
Power Consumption
- 110 VAC: 5.7 W: 139 BTU
-
Environmental Conditions
- Operating temperature: 0-50 °C
- Storage temperature: -20 - 60 °C
- Humidity: 0-80% RH, non-condensing
Physical Properties
- Housing: Metal
- Weight: 2.62 kg (5.77 lbs)
- Dimensions (L x W x H): (17.02 x 6.43 x 1.73 inches) 43.24 x 16.32 x 4.40 cm
License
- Basic: 2 free licenses
- Maximum allowed licenses: 32 licenses
- Note: The ATEN Control Box comes with two free licenses stored on the device itself. Each time a mobile device connects to an ATEN Control Box for remote control, one license on the Control Box will be occupied. To purchase and add additional licenses to your ATEN Control Box, please contact the Engineering department with any questions.
Contents
- 1x VK2200 Gen.2 Control Box
- 1x power cord
- 1x foot pad set (4 pieces)
- 1x rack mount kit
- 1x terminal block kit
- 1x user instructions
