NX1042 IP Room Terminal / 9" Touch Screen / 125 KHz RFID / VoIP SIP / PoE / Two-Way Audio / RS485 Bus / Compatible with NX1071 and NX1075
- $ 27,799.00
- Brand: IBERNEX
- Availability: In stock
- SKU: NX1042
IBERNEX · NX1042 · Healthcare Services The control center for every room. 9-inch touchscreen, integrated RFID, and VoIP SIP. Everything staff needs, in a single patient point of contact. 9'...
Tags: categoria:Automatización e Intrusión , marca:IBERNEX , phone-system , proveedor:Syscom , sku:NX1042 , supplier:Syscom , syscom , telecom , voip
Interface
9 inches that respond even with gloves on.
In a hospital, there is no time to take off your gloves. The NX1042 touchscreen responds to contact with latex, nitrile, and bare skin alike. Staff can code alarms, check tasks, and register presence without interrupting their workflow.
Every touch translates into an immediate action: call, code, identify, cancel. No unnecessary menus. No friction.
Identification
Card to the reader. Presence registered.
The integrated 125 kHz RFID reader identifies staff instantly. Nurses and doctors present their card, and the system logs who entered, when, and what they did. No passwords. No extra steps.
Full traceability of every visit to every room, automated from the first contact.
Communication
Heard. Understood. No need to repeat.
The high-sensitivity omnidirectional microphone captures voice from anywhere in the room. The integrated speaker reproduces audio with clarity. Direct VoIP SIP calls between rooms, nursing consoles, and medical stations.
Code blue, direct calls, public address. Everything from the same terminal. No additional phones.
Installation
One cable. Data, voice, and power.
PoE IEEE 802.3af. A single Ethernet cable carries power and connectivity to the terminal. No extra power adapters. No parallel electrical runs. The second Ethernet port extends the network to another device in the same room.
All terminals, consoles, and stations connect via IP network to the central server. Flat, scalable architecture, without intermediate controllers.
What staff can do from the terminal
Every function, one touch away.
In the room
How it integrates into the hospital environment.
Applications
Where every second counts.
Hospitals
Patient-nurse call, code blue, staff traceability.
Clinics
Consultation management, medical identification, internal communication.
Care Homes
Sociosanitary attention, resident monitoring, scheduled tasks.
Day Centers
Activity logging, staff localization, rapid communication.
Specifications
Technical data.
Interface
- Screen
- Color touchscreen, 9 inches
- Glove use
- Latex, nitrile
- RFID Reader
- Integrated 125 kHz
- Speaker
- Integrated
- Microphone
- Omnidirectional, high sensitivity
Connectivity
- Protocol
- VoIP SIP
- Ethernet Ports
- 2 (Port 1 with PoE)
- Bus
- RS485
- Bed buttons
- Up to 2 direct (NX0881)
Electrical & Physical
- Power Supply
- 12 VDC / PoE IEEE 802.3af
- Consumption
- 550 mA at 12 VDC (7.6 W PoE)
- Dimensions
- 200 x 100 x 50 mm
- Weight
- 0.3 kg
- Casing
- Antibacterial
- Mounting
- Surface
Compatibility
- Consoles
- NX1071, NX1075
- Software
- HelpNex
- Peripherals
- NX0881, NX0397R, NX0397B, NX0397G
- Signaling
- NX0176 (four-color light)
Note: Certification is required for installation and to request technical support.
Ibernex Ecosystem
One terminal. The entire system connected.
The NX1042 is the point of contact between the patient, staff, and infrastructure. It integrates with NX1071 and NX1075 consoles, HelpNex software, bed push-buttons, button modules, RFID readers, and visual signaling. A complete IP-based patient-nurse call ecosystem.